First, the working principle of electric shutter door motor
1. Working principle of motor for electric rolling shutter door The electric rolling shutter door is mainly composed of door body, driver and control system. The door body is made of high-quality stainless steel and aluminum alloy special profiles, articulated in parallelogram principle, flexible in expansion and contraction and large in stroke. The driver is driven by a special motor, the worm and worm wheel decelerate, and it is equipped with an automatic clutch or a manual clutch.
2. The shutter door has plug-in motor and tube motor. Different types of motors, different models, different brands, different places of origin, imported or domestic carriages will be different.
3. The electric shutter door body is made of high-quality stainless steel and other materials, and the handover is based on the parallelogram principle, which is flexible and flexible. The driver consists of an electric shutter door opener and a door control system. The electric shutter door opener is composed of motor and reducer, equipped with automatic or manual clutch, which can be automatically or manually opened and closed when power is cut off.
4. The automatic clutch can be opened and closed automatically when power is cut off, and the manual clutch can be opened and closed manually when power is cut off. The control system has a control panel and a button switch, and can also be equipped with a wireless remote control device according to the needs of users. Can be equipped with a scrolling display screen, showing 500 words of display content. It can also be equipped with intelligent infrared double-probe anti-collision device, which can automatically return to operation when encountering people or foreign objects within the range of 20-30CM to ensure the safety of vehicles and pedestrians.
Second, the electric shutter door motor installation method
First, the installation of the motor
1. Check whether the moving directions of the shutter doors corresponding to the up/down buttons are consistent. If not, set the switch button of the left/right switch in the controller.
2. Find out the adjustment button that sets the upper/lower limit position according to the up-and-down direction of the shutter door. In order to make the shutter door automatically stop at the specified position, it is necessary to adjust the up/down button counterclockwise or clockwise.
Second, debugging
1. Insert motor connector into the controller.
2. Insert the battery box plug into the controller.
3. Turn on the power supply and check whether the panel indicator light is on. If not, check the incoming line of the main power supply. When you use it for the first time, you must turn on the power to use it.
Third, the installation of the controller
1. Install the controller hook on the wall, or install the controller directly on the wall. (The controller should be more than 30cm away from the metal plane, and it is forbidden to install it in metal cans or containers. )
2. The battery box should be installed horizontally.
3. The wiring of the emergency switch leads the emergency power interface (two wires) on the controller to a place where people can easily operate and keep them in order. Provide outgoing lines at random. If the user extends the leads by himself, the cross-sectional area of each extension line must be greater than 2.5 square millimeters.
Only professional knowledge can make our life better. The above contents are the working principle and installation method of electric shutter door motor brought by Bian Xiao. So you will have your own method when installing.