Is to put rubber strip into the wound:
This is also one of the most traditional tire repair methods. To put it simply, punch a nail hole in the tire tread, use a rubber strip, and then re-insert this nail hole for you.
The disadvantage is that the wound will expand:
This method obviously has a disadvantage, that is, the nail hole was originally only 3mm broken, and there may be a rubber strip of 5mm to 10mm where you plug it in, which will enlarge your original wound, so this method is mostly used for first aid.
The advantages are convenience and quickness:
If you are on the road in the middle of nowhere, or the tire is not easy to disassemble, and there is only a roadside stall, your tire can be repaired directly without being torn off from the steel ring.
Second, the tire repair method
Patch tire repair method is also called internal sticking method. First rip off your tire, clean the inner wall of the tire, rub it with a small washboard, then stick the tire patch like a small patch with glue, and finally press it firmly.
Advantages: it takes a long time and is economical;
It can take a long time after repair. This practice is more mainstream and economical.
The disadvantage is that it is difficult to repair when the wound area is large:
The disadvantage of this patch method is that when the tear area is relatively large, the patch will not be attached if it is not large enough. And to a certain extent, this patch can't maintain the original strength of this car. If it's just a nail, a small stone and a bolt, this repair method is still worth recommending.
Third, mushroom nail tire repair
Mushroom nail tire repair is also a kind of internal repair, that is, mushroom nail tire repair. "Mushroom nail patch", as the name implies, the patched thing looks a bit like a mushroom. Poke your wound from the inside with this sharp one, and then this big flat ass is stuck in your tire.
Advantages Good tire repair effect:
This solves the problem of automobile sealing, and the poked part will better supplement the overall structure and strength of your tire. Moreover, this tire repair method can basically avoid secondary wound cracking or wound expansion, which I think is still good.
Disadvantages are expensive:
This needs to be weighed.
Fourth, fire compensation.
This kind of tire repair is not very common, and "fire repair" is also a kind of internal repair. Basically, it is used on large trucks, pasted with patches, and then vulcanized at high temperature with a vulcanizing machine, and the adhesive strength will be better.
Generally, the tires of family cars should not be repaired by fire;
Melting your tires with "fire repair" is not worth the candle. Usually there are only thick tires such as large trucks, and the requirements for tire repair will be higher.
Five, tire repair fluid
This tire patching method is widely used in the tire patching of electric bicycles. In fact, the method of use is quite simple. All you have to do is "click, click, click", then press it into the mouth of your spool, and "bang" it up.