0 1 lead skin selection: thickness, width and width are suitable for fishermen. According to the overall size of the target fish, they should choose to use a float with appropriate lead content, and then use lead skin with appropriate thickness and width according to the size of the float.
When carrying heavy lead, it is necessary to use thick lead skin with wide overall width, and the heavy lead only needs to be rotated several times, which not only improves the working efficiency, but also avoids the problem that the lead skin is easy to burst when using fine lead.
When the float is mixed with small lead, lead skin with thin wall thickness and narrow overall width should be adopted. This kind of thin lead roller is easy to carry out more accurate lead trimming.
Lead skin rolling: ensure that each layer is tightly pressed and there is no gap between layers, and ensure the unity and reliability of lead drops. First of all, you should press the front of the lead skin into an arc shape with a straight piece of metal material such as thin iron wire or the outside of scissors, put it on the lead skin seat, and squeeze it tightly with your fingernails, then roll it down layer by layer and tamp the lead skin, and squeeze the gap in the middle of the lead skin hard.
If the lead connection is too loose, the pole will easily explode. Once the lead skin bursts open, it will be severely deformed and can no longer be rolled tightly, so it is necessary to replace it with a new lead skin. In order to avoid lead explosion, besides the lead skin is tightly rolled, it is also necessary to be careful not to lift the pole violently.
Lead pendant shape: It can be used for normal bleaching after being polished into spindle-shaped smaller lead pendant; If it is heavy lead, it must be cut into spindles before bleaching. After winding the lead skin of heavy lead, the two oblique angles at the tail end of the lead skin should be cut into arcs, and the oblique angles at the left and right edges of the lead skin column should be cut and polished into slopes, which is actually to polish the lead pendant into a spindle shape.
Spindle lead pendant can not only reduce the load on the lead column when lifting the pole, but also avoid lead explosion when lifting the pole; It can also reduce the sound of lead falling into running water and avoid the rock rod from scaring the fish; It can also effectively reduce the situation of hanging lead skin on the bottom, even if the bottom is sometimes hung, the later operation will be much more convenient.
Integration of lead pendant: don't add lead skin. In the bleaching process, attention should be paid to maintaining the integrity of the lead pendant. In other words, lead can be added without lead. If you really have no choice, you can add one piece of lead instead of two pieces of lead.
Therefore, when fishing friends are trimming lead skin, they must pay attention to trimming bit by bit, and don't be impetuous. Only after experiencing it can we speed up a little bit, avoid cutting too much lead, and add lead skin directly. Once lead is added, there will be a gap in the middle of the lead skin. It is very easy to break the lead skin when lifting the pole, and a small piece of lead skin will fall into the water, which will be bleached again, causing unnecessary inconvenience.
05 lead pendant fixation: When two space beans are fixed by hanging pendant fishing normally, the lead pendant in the main task is locked. It can be said that if you want to catch some spirits, the lead pendant must be locked; If you want to be straightforward, the lead pendant can be a little looser. If big lead is used, space beans can bloom 5- 10 cm.
In some fishermen's fishing groups, there is only one space bean on the lead pendant, and the eight-character ring is just below the lead pendant, which is also inappropriate. The correct way is to put a space bean on the left and right sides of the lead pendant, and these two space beans play the role of locking the lead pendant. The advantage of this is that it can pull up the lead base. Pulling 3 cm higher is equivalent to the sub-line popping up 3 cm. Pull it up a little bit, and it's a small flying line. If you push the floating base down, it will become a flying line. This is especially effective for catching the nests of floating fish and semi-water fish.
That's all I have to share today. I hope to help all fishing friends! If you have a better idea, please leave a message in the comment area, and we will improve our fishing skills together. Thank you!