How to deal with the gap between the cabinet and the wall

1. First scrape the gap between the cabinet and the wall with a putty knife, and scrape it into a figure of eight with a wide outside and a narrow inside. Filled with gypsum block and dry powder. Don't use the wall to fill the gap, which is about 10 mm lower than the wall. 2, gap, after brushing latex paint, stick glass cloth, scrape putty and the original wall, and then use sandpaper to polish the putty when it is dry. The latex paint on the wall surface, compared with the color of the wall surface after drying, has little color difference and can be painted on a large area. Science popularization of related knowledge: 1. Before brushing latex paint for the first time, you must choose to level the wall with putty powder to do a good job of mildew and moisture prevention. Before choosing putty powder, you must choose products with good quality, waterproof and moisture-proof, so as to ensure that latex paint will not fall off because of poor quality of putty powder in the later use process. 2. Put the mud powder into a mixing barrel, and add water while stirring to reach a suitable consistency. Wipe the putty powder on the wall with a scraper to level it. After the putty powder is completely dried, polish the surface of the putty powder with abrasive paper to ensure the smoothness of the putty powder and ensure that there will be no unevenness when the latex paint is brushed in the later period. 3. After painting latex paint, you must wait for about three months for the smell to dry before moving in. Remember not to move too fast, lest harmful gases be inhaled into the human body and affect your health.