Can the dependent suspension be adjusted?

Of course it can be adjusted. The advantages of dependent suspension are low manufacturing cost, simple structure, small occupied space and good durability. The disadvantage is that the comfort is poor and the handling is worse than that of independent suspension. And some automobile rear suspensions that pay attention to sportiness and handling will also use dependent suspensions, which not only need good structure and materials, but also need excellent engineers to adjust them. Even excellent engineers can adjust the independent suspension, which can be very comfortable and can be very sporty. The common dependent suspensions in automobiles are integral bridge suspension and torsion beam suspension. Dependent suspension can be adjusted, but it is equivalent to readjusting everything above the wheel, and the requirements are too high. If the adjustment is not good, it will easily cause safety problems: 1. The dependent suspension system connects the upper and lower wheels with an axle (or structural member). There are many kinds of dependent suspension systems because of the different suspension structures and the different connection modes with the car body. 2. The advantages of independent suspension are: light weight, reducing the impact on the car body and improving the ground adhesion of the wheels; Soft springs with lower stiffness can be used to improve the comfort of the car; 3. It can reduce the position of the engine and the center of gravity of the car, which will improve the driving stability of the car; The upper and lower wheels jump independently and are not related to each other, which can reduce the inclination and vibration of the car body; 4. However, the independent suspension system has some shortcomings, such as complex structure, high cost and inconvenient maintenance. At the same time, due to the complex structure, it will occupy part of the car's seating space.