Knitting skills:
1. Sticking method of support line. Support wire is used when weaving rope and core wire. The length of the support line is determined by the width of the work. Fix the rope directly with a pin, and the rope will easily spread out and not be fixed firmly. Tie a knot first, and then fix it with a pin at the knot, which is more secure. Insert the head of the pin outward at a 45-degree angle, which is not easy to pull out.
2, the basic method of connecting the rope. Connect the braided rope and the core wire to the support wire. The following is the connection method to make the contact point inconspicuous. Fold the braided rope (or core wire) in half, put it behind the support line, and bend forward at the fold. The other end of the rope passes through this ring. Then pull. That's settled.
3. Cross knot. Weave the core thread horizontally and weave two knots side by side. In order to see more clearly, the core wire and braided rope are different colors here. In the step of knitting from left to right, the right hand holds the core wire and puts it on the braided rope, and the braided rope bypasses the core wire from above and goes out from below. Tighten. The braided rope bypasses the core wire. Tighten, 1 section is finished. Repeat step 1-4.
Weave from right to left; Hold the core wire in the left hand and put it on the braided rope. The braided rope bypasses the core wire from above and then goes out from below. Tighten. The braided rope bypasses the core wire. Tighten, 1 section is finished. Repeat step 1-4.