1. Pass one end of the main line through the eight-character ring and make 2 ~ 3 imaginary turns on the eight-character ring (the main line will pass through the imaginary circles on these eight-character rings in the subsequent operation).
2. Wrap the main line that passes through the eight-character ring around the main line that does not pass through the eight-character ring for 2-3 times, and then pass the main line through the imaginary circle formed by the main line and the eight-character ring.
3. Hold the main line through the imaginary circle with one hand, and gently pull the other end with the other hand to slowly tighten the main line. Be careful not to hurt the main thread when tightening.
Fishermen know that the 8-shaped ring has two main functions in the line group, one is to connect the main line and the auxiliary line, and the other is to release the rotating force of the fish to the line after catching the fish, so as to reduce the risk of disconnection.
Main line knotting method:
1, knotting the outer ring: firstly, fold the main line in half by about 10 ~ 15cm, then wrap the main line around the outer ring for 2 ~ 3 times and then pass through the inner ring, and finally gently pull both ends of the main line to make the main line tightly knotted.
2. Inner ring knot: First, fold the main line in half about 10 ~ 15cm, and then wrap the main line around the formed ring for 2 ~ 3 times before passing through the inner ring. Finally, gently pull both ends of the main line and tie the main line tightly into a knot.
The main connection is extremely slight:
1. Wrap the main line into two rings with your thumb and forefinger, and then fix the rings wrapped by the main line with your fingers.
2. Gently thread the rod through the winding ring, and gently tighten the main wire to firmly and slightly fix it on the rod.
3. Move the space bean upward and clamp the main line on the pole. When taking the thread, move the space bar down, hold the thread end and pull it out.