The factory building is an important place to make money. If you want to make money and prosper, you must find a prosperous and prosperous environment. From the perspective of geomantic omen, the colors inside the factory should be combined with the five elements of the owner's life, the orientation of the factory and the five elements of the goods produced. When choosing the location of the factory, we should pay attention to the openness of the factory and accept the vitality from all directions, which is consistent with the emphasis on accepting visitors from all directions in business. According to this principle, when choosing the address of the factory building, we should also consider the openness in front of the factory building, and there should be no obstructions, such as fences, telephone poles, billboards, trees and so on. Paying attention to the openness in front of the factory can make the factory face all directions, which not only broadens the field of vision of the factory, but also allows distant customers to see the factory, thus spreading the commodity information operated by the factory. Feng Shui calls this kind of information transmission the flow of qi. With the flow of qi, there is vitality! From a business point of view, customers and pedestrians may come to order after receiving the product information from the factory. So? Let's talk about matters needing attention in feng shui planning of factory buildings.
First, the key to factory feng shui lies in the following aspects:
1. location and orientation: the factory building sits on the mountain in season, facing the stars in season, full of energy and flourishing for the mountain, so that the factory building can flourish and its financial resources can be rolling. That is to say, there are highlands behind the factory, or buildings, and water (rivers, roads, etc.). The direction of the factory gate is relatively open and flat, or parking lots, parks, squares, etc. Very bright. Without a reasonable factory feng shui pattern, it is difficult to continue to prosper for a long time. Factory decoration geomantic omen must be combined with the numerology of major shareholders to locate the overall geomantic pattern, mainly surveying the geomantic lines and patterns of the gate, front desk, general manager's office, financial office and marketing department to ensure the smooth operation of the factory. Only by grasping the main details of factory operation can management be smooth, but it is still very difficult to achieve smooth management, scientific research and production. At this time, it is suggested that the factory take feng shui as the condition. Master Liu has been engaged in geomantic survey for 30 years. Seiko's factory site selection survey, decoration Feng Shui and Feng Shui layout guidance will help you broaden your horizons, grasp regional advantages and develop your career!
2. The internal layout of the plant is reasonable: the office building should be in the talent position or prosperous position of the whole plant (vitality, longevity and health). The layout of the office should be more refined. The boss's office should be located in Wang Cai, bigger, and the vice president's office and the chief officer's office should be divided into two sides, smaller, which will help the left and right. The financial office should be located in the financial position of the office, and the window should be able to accommodate foreign currency. The offices of secretaries and technicians should be located in Wenchang, security personnel should be killed, and other meeting rooms \ reception rooms should be exquisite.
3. The door of the production workshop should be opened in a prosperous position, and it is good for the doctor that the important indoor mechanical distributor is angry. The workshop office should be located in the workshop.
4. The dormitory should be lower than the factory building, canteen and other living facilities, and the location and layout should be reasonable. Toilets should be located in the isolated five ghost places of the factory building to curb the fierce position, so as to ensure safety, achieve good economic benefits and reduce accidents in the factory building.
5, plant greening, lucky fountain, rockery, road distribution, etc. Pay attention to the layout of feng shui.
6. Whether the location is good: the building is good, whether the nearby buildings are coordinated or digested, the location is good and the traffic is convenient.
7. Architectural appearance: If the facade is elegant, the exterior wall tiles are of appropriate color, the glass is bright, and the building has a noble and generous style.
8. Spiritual wall: the name of the building should be elegant and rich, and the logo or name of the building should be kept fresh and bright. The foyer and spiritual wall should be three-dimensional and dynamic.
9. Layout in the factory: Compartments should be of appropriate size, and access lines should be unblocked. Lighting should be sufficient. Besides fluorescent lamps, there should be light bulbs in the corners to make the air circulate throughout the room.
10. Basement: Generally, the basement is suitable for warehouses, factories and restaurants, but not for the office of the chairman, the office of the general manager and joint-stock companies.
1 1. Mascots: Mascots like gold ingots, gods of wealth, precious stones, vases, symbols of the god of peace, etc. Demon-making objects such as Taiji diagram, Bagua diagram and stone lion. The mascot is that when you see it, you will feel that it is very kind and blessed. You can put more indoor mascots, but you can only specialize in one or two.
12. Indoor plants: Although plants belong to the shade, they can blossom and bear fruit outdoors, that is, there is yang in the shade. Bringing plants indoors is really helpful to human physiology and psychology.
13, others: such as the layout of financial positions.
Second, feng shui matters that should be paid attention to when planning the factory door
When planning a factory, we must pay attention to the factory gate. The gate determines the orientation of the factory, and the orientation determines the fortune of the factory; In addition, the vertical structure of the gate must also be considered. Take a good look at the gate and see if the hall is prosperous. In addition, the boss's office, financial office and business office of the factory should be in the prosperous position of the factory. Only when the boss is prosperous, the factory will prosper, the finance will prosper and the business will prosper. Fortune stars thrive by opening doors, setting up stadiums, fountains or pools, and drainage ditches. If fountains are set up, they can promote wealth. Building a tall office building in the bustling area of Xing Shan can achieve the effect of enriching the people. Man is the foundation of wealth, and wealth is the source of man. All the wealth and development of a company are inseparable from talents, so wealth and people (Xing Shan) are equally important. The position of the lost star is the position of grabbing money. After the main factory delivers the goods, the money cannot be collected, or the insiders are greedy and collude with each other. This is located in a relatively low dormitory building and so on. So you won't rob money when you go up the mountain. The position of the lost mountain star is the position of robbing people. When the personnel of the main company flow, it is advisable to leave a space or a pool to let them enter the water, so as to achieve the effect of gathering mountains to ward off evil spirits.
Three, feng shui planning and layout of industrial plants
There are two kinds of factory feng shui; One is to rent a factory and the other is to build a factory. In addition to the geographical location and geomantic environment of the factory, we should also consider the declining geomantic layout of the whole park and the location of the rented factory in the park. At present, most of the factories in the industrial park are built on the same mountain and in the same direction. Some of them did not invite geomantic survey when building the park, which led to the decline, and some of them were rented out to others for temporary storage. Therefore, before renting a house, you should know the layout of the park and factory buildings and the decline of the RMB. Geographical location and environment of factory site selection. The factors to be considered in the factory address mainly include the following aspects.
(1) site is located in the urban area; This kind of factory is suitable for high-tech industries which are technology-intensive and capital-intensive, occupy a small area and have no noise, air and water pollution. Advantages are: convenient transportation, well-informed, easy to introduce talents and low transportation cost. Disadvantages are: high land and labor costs, many restrictions, easy to move because of urban planning and other reasons.
(2) The site is located in the suburbs; This kind of site has the strongest applicability, has all the advantages of the downtown site, is also suitable for labor-intensive enterprises, and has low land and labor costs and relatively few restrictions, so it is an ideal site choice.
(3) the location is in the countryside; There are many kinds of such venues, such as far away from cities, docks and railway stations, as well as roads, water supply and power supply, which should be analyzed differently. This kind of factory is suitable for labor-intensive and polluting industries. Advantages are: low land cost, low labor cost, close to raw material production, low requirements for workers' quality and easy recruitment. There are also many disadvantages: high sales and transportation costs, small amount of information, poor traffic conditions, frequent water and power outages, etc.
The advantages and disadvantages of the above analysis are that geographically, it is not that the location with many disadvantages is not suitable for factory location, which depends on the nature of the factory. For example, the location of the city center has many advantages, but if your factory is a labor-intensive enterprise, it is not suitable. It is more appropriate to arrange it outside the school or in the countryside. We should consider raw materials, labor supply, marketing, land use costs and investment environment. Whether the supply of raw materials is guaranteed, the freight rate is high or low, whether skilled workers or heavy manual workers needed for production can be recruited, and whether the market sales are favorable are all factors to be considered in the factory site selection. At the same time, whether the place suitable for your factory can buy or rent a suitable land plant and whether the land price and house price are reasonable are all important conditions that must be considered in site selection. There is also a very important premise, which is the investment environment (including hard environment and soft environment) where the site is located. Hard environment mainly refers to whether the traffic is convenient, whether the demand for electricity is guaranteed, and whether the water supply, water source and sewage discharge can meet the requirements. Soft environment mainly refers to whether the government attaches importance to it and provides a relaxed environment. For example, whether there are tax incentives, whether administrative fees are abolished or reduced, whether there are arbitrary charges and levies, whether the efficiency of government agencies is high or low, whether there is a bad habit of eating cards and asking the yamen, and of course, whether the local folk customs are tough and the public security situation is good or bad.
In addition to considering the general space environment, factories and enterprises should pay special attention to the following points: put the frequently used machines in the right position, put them properly, be stable and energetic, and have great fortune; Improper placement, such as Huang Wu's position, will lead to continuous diseases. However, if the sword is placed at the turn of the century, there will be fighting, and the sword will meet the soldiers. If the bullfight is placed in the position of evil spirits, it will make people angry and disgusted. Factories are generally placed in the open space in the suburbs, but not in the downtown area of the city. A factory building is different from a shopping mall. Shopping malls need concentrated personnel and large turnover, while factories need safe production and safe sewage discharge. If the machines in the workshop are located in Kyrgyzstan, the space environment of the workshop is not only a matter of site selection, but also a matter of machine placement. The location of the workshop can refer to the location of the house, and the placement of the machines can be guided by professional space decoration planners. The signboard of an enterprise cannot determine and influence the fate of people, let alone the fate of future generations, but it can affect the beauty of the enterprise and the harmony of the environment, thus affecting the mentality of the operators. From the signboard hung by the enterprise, we can observe the fortune and cultural accomplishment of the enterprise, and also see the personality, health and family harmony of the enterprise as a legal person. More importantly, it is judged according to the height, color and size of the signboard. For business operators, only a good space environment may not fundamentally change the mode of operation, but a reasonable structural layout is the best way to attract wealth and ward off evil spirits. At the same time, the color matching should also conform to the variety of merchants, be clear, make people see at a glance, be pleasing to the eye, and the signboard color should be harmonious, making people feel cordial and pleasant. Signs should be artistic and have the function of making money. Therefore, the layout appraisal of a factory must be based on the location, orientation, doorway and pattern of the factory. According to the birthdays of the company's chairman and general manager.
, identified by the pattern of the factory. Determine and properly adjust the factory door opening, lighting, air, communication, seating direction, good or bad direction, moving line management, etc. , so as to create a good pattern to improve work efficiency, facilitate management, improve performance, and make great achievements!
Starting a factory and starting a business is a big thing, so we should be careful and plan everything carefully, especially the location of the factory, whether to rent or build a factory. Need to master the skills related to the factory, such as the surrounding feng shui, environment, geographical location, nepotism and so on. Therefore, the layout appraisal of a factory must be based on the location, orientation, doorway and pattern of the factory. According to the birthdays of the company's chairman and general manager, it is identified by the pattern of the factory. Evaluate and adjust the door opening, lighting, air, communication, seat orientation, good and bad orientation and moving line management of the factory. , so as to create a good pattern, which can improve work efficiency, facilitate management, improve performance, and make great achievements, and help you to have a prosperous business, a happy family and a happy life!