What should I do if the rear wheel drifts when LaVida turns?

The solution to the rear wheel drift of LaVida turn: It is suggested to slow down in advance before turning and turn at a constant speed, and gradually accelerate after turning. Don't step on the gas pedal. It is caused by large braking force, high speed and loss of tire grip. Usually, rear-wheel drive vehicles are more prone to this phenomenon when cornering, which is more dangerous in daily driving.

If it is not the drift phenomenon caused by intense driving, then you should pay attention to it, check the degree of tire wear, see if the grip performance meets the safe driving, and then see if the brake system is normal. The function of automobile braking system is to slow down or even stop the moving automobile according to the driver's requirements; Stabilize the parked parking lot in all kinds of road conditions.

Driving and turning skills

1, the steering follows the principle of outside-inside-outside: if you want to pass through the curve quickly and don't want to produce too much centrifugal force when turning, you must make full use of the width of the road surface and try to turn it into a straight line with large curvature.

2. When going uphill, first loosen the oil and downshift: then refuel quickly and leave through the uphill curve. Before entering the curve, release the throttle, let the vehicle enter the curve by leaning against the outside of the curve at a faster speed, and lower one or two gears. Select the route and correct the direction while lightly stepping on the throttle.