First of all, you need to make a suitable floor tile size according to the location and size of the floor drain, and leave a small gap next to the floor tile for the floor drain to place. Next, stick a waterproof isolation film around the floor drain to prevent water from leaking out of the cracks in the floor tiles. Before laying the floor tile, be sure to apply the floor tile glue evenly on the joint between the floor drain and the floor tile, so as to ensure the maximum fit between the two edges.
If the floor tile and the floor drain are not completely aligned, the position can be adjusted with wooden boards or nylon ropes. For the floor drain outside the room, we should also pay attention to the drainage slope, so as to ensure that water flows out of the floor drain and will not accumulate in the room. In this process, we must be careful and accurate, ensure that the floor tiles and floor drains are firmly connected, ensure that the whole room is completely waterproof, and avoid problems such as water leakage in the future.
In a word, floor tiles and floor drains are key components in buildings. When installing them, you need to keep in mind the correct practices and precautions, and constantly improve your skills in practice to ensure perfect docking. Only in this way can the structural stability and safety of the house be guaranteed.