How to mop floor tiles clean and fast
Have you ever known how to mop floor tiles clean and fast? Floor tiles are stepped on by thousands of people every day, and the dirt left behind is difficult to clean. How can mopping the floor effectively and quickly remove these stains? I have carefully organized for you how to mop the floor tiles clean and quickly. I hope it will be helpful to you. How to mop floor tiles clean and quickly 1
1. Clear the area.
Remove tables, chairs, rugs, and other obstacles on the floor. If you are going to clean these things too, clean them first. That way, if there are any pieces that are going to fall out, they will fall out before you even clean them. If you have to clean your desk, desk, or other surface, clean them first.
Invite out any people or animals that like to roam there. This includes children, partners, roommates, pets, and guests.
2. Sweep or vacuum the floor first.
This may seem unnecessary, but a mop can do this nasty job, but mops collect crumbs, dust, hair, and other solid debris. If you mop a floor that hasn't been swept beforehand, the result is that you'll be walking around with all this junk. Additionally, if dust and dirt are not removed first, they can leave scratches on the floor.
3. Put the detergent of your choice in the bucket and pour enough warm water to completely cover the mop head.
Leave enough space for you to insert the mop and to lift the wringer out of the water, if it is attached to the mop bucket.
Use the cleaner according to the directions on the bottle or package. Usually, that just means enough to create lather. Do not overuse detergent. This provides no additional benefit and may leave residue or damage the ground.
It is okay to use dish soap. Just squirt a little and add it to the water.
4. Soak the mop in the solution and let it completely absorb the detergent.
Sometimes a hard, dry mop needs a soak to loosen it up.
5. Wring out excess water.
You want the mop to be damp, not soaking wet.
6. Start in a corner of the room.
Drag the mop back and forth over the area, applying a little pressure to remove the dirt. After you have mopped a small area, or when the mop looks dirty, soak the mop in water again and wring it out, then mop the next area. For polyurethane wood floors, mop along the grain of the wood. For textured floors, drag the mop in a figure-eight circle.
7. For stubborn dirt, you may need to mop twice.
The first time, make the mop a little wetter than normal and let it wet the area. Let the moisture sit on this floor for a few minutes while you mop the next area. Give the cleaning solution extra time to break down the dirt. Then, soak the mop again and wring it out as usual. Go back to the dirt area and drag away the water and loose dirt.
8. Continue to clean the entire ground in this way.
9. Keep dragging with your back to the door, and don’t step on the place you just dragged.
Any dust that clings to the soles of your shoes will stick to the floor and turn into mud. If you step on a wet spot, mop the area to clean up any traces.
10. Let the towed area dry completely.
Open doors or windows to allow air circulation to dry the floor faster. Unless there are serious water marks on the surface, there is generally no need to vacuum the floor manually. Let the air dry the floor.
11. Restore any furniture you removed.
12. When you finish mopping the floor, hang the mop up to dry.
If you leave it in the bucket, it will rot and start to smell bad. Hang it with the wet area facing down, where it will not be corroded by water. Pour the wastewater from mopping the floor into the toilet. It's better to pour sewage down the toilet that has solid sediment so you don't dirty your sink. If it's not absolutely necessary, it's a good idea to rinse and wring out the mop before you hang it up so that dirt and detergent residue don't stay on the mop. How to mop floor tiles cleanly and quickly 2
Tips for mopping the floor
1. Add salt and toilet water
When mopping the floor, you can add a little to the mop bucket of salt and toilet water. Table salt can play a better role in disinfection and sterilization. Toilet water can repel mosquitoes from your home. It can also make the air fresher. Suitable for adding when mopping the floor.
To clean cherries, you can use salt water, rice water, edible alkali and baking soda, which can achieve a thorough cleaning effect. When using salt water, you need to add an appropriate amount of salt to the water to clean the cherries. Put it in, stir it back and forth several times with your hands, and finally rinse it with clean water.
2. Salt and white vinegar
When mopping the floor, add a little salt and white vinegar to the mop bucket. Can play a role in sterilization and disinfection. White vinegar can also remove stickiness and odors from your floors. Makes the floor cleaner. Be careful not to use too much white vinegar. Adding too much can fill your home with a vinegar smell.
3. Vinegar and baking soda
Mixing vinegar and baking soda evenly and mopping the floor can solve the problem of black and moldy floors. Vinegar has the effect of disinfecting and deodorizing. Baking soda can remove stubborn stains from your floors. Restores shine and cleanliness to floors. You can also use a brush dipped in white vinegar and baking soda to scrub the tiles. Can clean the gaps between ceramic tiles.
If you want to get rid of cockroaches, you can put dried orange peels in the closet or in the corner. The pungent smell of orange peels will drive away cockroaches. You can also put washing powder in the kitchen. Cockroaches will be poisoned and die if ingested.