How to draw eye shadow with flat nose?
Preparation tools: MAC shadow powder, EM volume repair pen, CPB high gloss powder and three nose shadow brushes.
The first step: the first stroke must start from both sides of the mountain root, because that is the most sunken place of the nose as a whole. Whether your nose is high or low, this is the darkest place, so you can't go wrong writing from here.
Step 2: Draw a nose shadow on both sides of the nose as shown. Have a smooth arc, not a straight line.
Step 3: Use a clean nose brush to smudge. Be sure to pay attention to the nose shadow not only up and down, but also on both sides, in order to have a natural dizziness.
Step 4: Paint the bridge of the nose with highlights to make it look straighter.
Make-up steps and skills to highlight facial contours
Step 1: Foundation
You should get into the habit of applying foundation with the right foundation tools. As the foundation of makeup, foundation provides basic cover for the face. When you use high gloss powder or repair powder, foundation will protect your skin and make you feel more comfortable.
Step 2: Use a light foundation to highlight.
Light foundation should be 2 shades lighter than natural skin color, forming obvious contrast effect. Use a cosmetic sponge, starting from the middle of the forehead and moving to the center of the nose in a fan shape. Continue to walk along the bridge of the nose to people. Starting from the position about one finger wide outside the corner of the eye, move the sponge to the outer edge of the nose to form a triangular area as shown in the figure. The foundation of the left and right sides should be symmetrical. Draw a small circle on the chin and apply a light foundation, and apply a foundation at the extension between the eyebrows.
Step 3: Shape the outline with repairing powder.
Use repair powder (bronze color, or a tone 2 shades darker than natural skin color) to start building the outline. Using a brush, apply makeup powder to the chin extension brush. Form a thin line between the highlighted area of the nose and the eyelid, and shape a shadow along the outermost part of the forehead. At the cheekbone, find the point from the center of the eye to the lower part of the cheekbone and start to move along the cheekbone to the ear.
Step 4: Highlight the outline with high gloss powder.
The use of high-gloss makeup powder can make the facial contour more prominent. It is recommended to use it only under the dark outline of cheekbones, but it can also be used on the forehead, bridge of the nose and other places where you want to enhance the three-dimensional effect. Generally, high-gloss powder is used in the inner area of the face, such as under the eyes, bridge of the nose, forehead, chin and brow bone. Because these areas are typical dark areas, they are most likely to cause facial edema and dullness. Your face will be brighter and healthier after using high gloss powder in these places.
Step 5: Observe and correct.
Observe whether there are covered spots and whether there are boundaries between skin colors. At this time, you need to look at the outline you just drew and see if there is anything that needs to be improved and corrected. The use of cosmetic powder and gloss powder together can eliminate defects and set off the most prominent features. For example, there are more bright eyes without dark circles. If you think the bridge of the nose is too thin, use high gloss powder in the center and sides of the bridge of the nose, and the bridge of the nose will appear wider. Then, use a little dark repair powder on the edge to make it straighter.
How to use the double-head capacity repair rod?
Step one: cheek
It can be seen that the model's face is an ordinary round face, the facial features are not three-dimensional and the outline is not obvious. Apply it to the dotted line from cheeks to chin with a capacity-repairing stick. Push the beauty cream from the outside to the inside with the beauty egg, and extend it to the chin and neck, so that the color of the face and neck can naturally transition.
Cover your forehead with your nose
Apply it to the joint between the eye socket and the bridge of the nose, on both sides of the nose, and then on both sides of the forehead near the hairline. Apply your fingers evenly on both sides of the bridge of the nose to repair the volume, and modify the nose shape with natural shadows.
Step 3: Highlight
Apply a high-gloss stick to the forehead, the roots of the mountain, under the bags under the eyes, and the place shown by the dotted line of the chin. Apply the high-gloss cream on the protruding part evenly with beauty eggs to smudge the boundary marks, so that the general outline of the face is much clearer and the cheeks are more three-dimensional than before makeup.
How to repair production capacity
1, how to repair the round face?
In fact, the round face of fleshy meat is the most difficult. With the help of all the hairstyles and face-lifting needles, it is actually very learned to decorate the face with highlights and blushes. As shown in the picture, find the part of risorius, smile and scan a layer of pink blush along the cheekbones from bottom to top. Gloss powder is coated on risorius in the circle as shown in the figure, and don't forget the bridge of the nose and forehead. The repairing powder is applied to the lower part of the blush, showing a fan shape, and the bun line is scanned into a figure of eight.
2. How to repair the square face?
If your cheeks are square or rectangular, you should pay attention to repairing your small cheeks with repairing powder. When high gloss powder hits the eye socket, it will show a three-dimensional face effect. Cinnamon powder blush is applied horizontally along the part parallel to risorius, and high gloss powder is applied in the middle area between the lower part of the orbit and blush, as well as the corner of the eye diagonally above. Forehead. For the repair powder, a three-dimensional triangular pattern should be made under the blush, and the area where the bun is looped.
3. How to repair the diamond face?
The first-class headline cheek lines are too angular, which will give people a strong feeling and the makeup will be too formal. Then our goal is to "grind off" all the edges and corners on the cheeks through blush, highlights and cosmetic repair. The blush of cinnamon powder is inclined at a 45-degree angle from the cheekbones. Then add a long high-gloss area above the blush, and don't forget to use high-gloss powder on your nose and forehead. Finally, it is repaired by sweeping the cheek like "cutting off" the edges and corners.
4. How to repair the awl face?
The awl face must be everyone's dream face, but even the awl face can't create an exaggerated cosmetic effect, so highlighting the awl face will make the face look softer. The specific operation steps are as follows. Just blush on the part where Risolis laughs, which will make your cheeks look fuller. The highlight should be played in the fan-shaped area below the blush to the chin. Finally, use repair powder to supplement shadows on both sides of the forehead.