1, first there is good glue, and then the glue nozzle should be cut flat, the size should be equal to the size of the aluminum alloy gluing position; When gluing, keep your hands steady, do not shake, glue in one direction at a time, and do not pause for many times. ?
2, it depends on the feeling, playing more, having experience, and naturally groping out.
3, cut a 45 angle, the size of the mouth depends on the size of the seam, so that it can be glued at one time, with beautiful appearance and glue saving. ?
4. The incision has an inclination angle of 45 degrees, so that the glue is flat and smooth without indentation.
5. Cut diagonally with wallpaper knife. Generally, there are several scales on the rubber nozzle, with the small mouth at the end and getting bigger downwards. You can cut from the smallest one according to your own needs.
1, the most important thing is to hold the trigger with your right hand, and the strength of extruding glass glue must be uniform. We should use what we usually call "yin force", that is, maintain a certain strength, not when it is big or small. The most important thing is to do it in one go. You can't squeeze and stop, otherwise the glass glue will be intermittent or big and small. Because usually when the glass glue is just squeezed out of the mouth, it is relatively large and spherical. If it is large and small, it can only be wiped on the back.
2, the left hand control, be sure to make the oblique mouth close to the gap, can't shake.
3. Keep your feet stable, calibrate the moving distance in advance, try not to move your feet too much, and separate your legs a little to ensure that you can use your upper body to translate or turn your waist, and try to squeeze out the straight line of glass glue. If you go too far, it will inevitably affect the stability of the extruded glass glue.
4. Adjust your breathing. Don't shout, keep breathing in a small range, or even hold your breath for a short time, so that your upper body won't shake too much because of breathing.