How to remove the toilet water inlet valve
First, remove the water inlet valve.
Make sure to slowly remove the water inlet valve. Only by completing this step can we proceed to the next step. This is the most important step. Make sure to remove the valve slowly.
Second, remove the cover above the water inlet valve.
We can easily see the water inlet valve of the toilet, so take off the lid first. When the lid is lifted, you will see the internal structure of the whole toilet. The usual function of this cover is to protect the water stop valve and piston inside and avoid man-made damage.
Third, remove the position of the white joint in the upper part.
Fourth, put the accessories of the white connection part aside and screw them counterclockwise when disassembling. If it is a smaller accessory, it will be more convenient to use tools of the same size. If you reinstall this valve, just twist it in the opposite direction with a screwdriver. I believe everyone can learn it, and it can be said that the operation is very simple.
Water-stopping principle of toilet inlet valve
Because the toilet inlet valve is invisible, when we press the flush button, the water valve pulls up the plug through a post connected to it, so that water will rush out and flush the toilet. When the water in the water tank comes out, the button on the toilet will slowly return to its original position, and the piston of the toilet will continue to stay in its original position. Then the water tank is filled with water through the device. This forms a cycle, refilling the toilet to ensure the recycling of the toilet.
That's how I introduced how to remove the toilet inlet valve. What is the water-stopping principle of the toilet inlet valve? We need to know the correct disassembly method to avoid damaging the inlet valve, and the use of the inlet valve is also very important. Therefore, when choosing the inlet valve, we must not ignore the quality problem, because the quality of the inlet valve we bought without the master is more secure.