Choose a facade that is wide but not deep
It doesn’t matter if the store is irregular or has many pillars, but if the facade design is not wide, it will be fatal
A wide facade will naturally make the door head larger.
It is a pity that the facade is too shallow, but there are many integrated ceiling decoration partitions. This defect can be effectively avoided through the design of the door head
If the facade is not deep, the area of ??the store will not be large. The rent is relatively cheap, which is a benefit
The most taboo is a narrow and long store. A store with a large area, a small facade, and a long depth is very unsuitable for integrated suspended ceilings
p>Be sure to remember this
Choose a small storefront on the first floor and a large storefront on the second floor
If the store is too small, the display will not be effective
But the rent of stores in good places is expensive
A better way is to find a store with a small first floor and a larger second floor in a mainstream area
The rent on the second floor will be cheaper than the first floor. There are many, and more importantly, a large door can be made on the second floor
It is difficult to make a door that is “upright and upright”
There will always be various restrictions on the door, and it is difficult to be perfect.
If the ready-made door headers are not in sufficient condition, you can consider extending the door headers up, down, left, and right
Some door headers in this way are often too long, some are too high, and some are too tall. There are obstacles that need to be avoided, which is the so-called special-shaped door head
For special-shaped door heads, a good door head design is required. Dealers must choose materials, colors, and logos when making door heads. Listen to the opinions of professionals as much as possible
Of course, doing so means that the investment will increase
But comprehensively, this investment is worth it
The door head When designing door headers, don’t use too many characters. They are generally brand names, industries or products, and attributes of the store. Which characters are big, which are small, and which can be omitted. For different cities, or even different markets in the same city, the door The information to be emphasized in the header is actually slightly different and cannot be mechanically "one size fits all"
Generally speaking, the most important thing is the brand name, product or industry name. These words must be large. As for the storefront Attributes, phone numbers, and addresses are relatively unimportant
But there are some "little things to pay attention to" in different situations: First of all, there are differences between stores within stores and independent stores
Independent stores require door openings The information should be more complete, and all the words should be written.
Because the store-in-store itself is in a professional market, the emphasis is on the brand, the brand name should be prominent, and the promotional LOGO should be prominent. Other words can be omitted or Smaller
Secondly, stores with different market maturity also need to be different
In large and medium-sized cities with high market maturity, the brand is emphasized on the door and the product or industry is weakened
On the contrary, in small and medium-sized cities, sometimes it is often necessary to emphasize the product or industry, but the brand must be relatively weakened
Every dealer needs to carefully understand the literal information on the door. As for the materials and materials used to make the door, Submitting for approval is something that professionals or companies must complete