Normal tile chamfering will cut the entire thickness of the tile at a 45-degree angle, and the effect of paving is to touch porcelain. Begonia angle is to set aside two millimeters of tile thickness and cut the remaining thickness into a 45-degree angle. Generally, a 5× 5mm process tank is formed, which has certain requirements for construction technology, and also has certain losses to the integrity of stone materials, and the labor cost is high.
Begonia angle is a chamfering method for the closing of stone and wall brick for engineering decoration. The main method is to stick grass-roots stone chips inside and grass-roots stone chips outside at the yang angle of dry hanging stone wall.
Advantages of begonia horn
1, beautiful appearance
Compared with the traditional touch angle, the angle of begonia is more detailed and beautiful. This technology cuts the corner 2 to 3 mm away from the glazed surface of the tile, so that after the tile is laid, the outer corner will look more beautiful and flat.
2, it is not easy to collapse porcelain
If the tiles are laid directly at the external corner without treatment, the joint between the two tiles is very fragile and easy to collapse and crack after a long time. However, if the tiles are paved with Begonia Angle technology, the joints of the tiles will be more stable, firm and stable, and the service life will be long.
3. Convenient sewing
Tile begonia angle technology needs to cut the tile into 45 degrees, so a groove will be formed in the middle after splicing, which is not only beautiful, but also simple to sew in the later stage, which makes it easier for us to clean.