Can you please tell me how to use the reel on the sea pole? Does anyone know how to tie the wire?
Fix the fishing wheel to the sea pole, pass the main line through a wire loop of the sea pole, and then tie a double knot into a small loop at the end of the main line. I might not see it clearly in the picture, so use thick lines:
Then pass the main line through the small ring to form a large ring. As shown in the picture:
Open the outlet ring of the fishing wheel, put the big ring on the line cup in the opposite direction and the line cannot be wrapped. When winding the line on the rocking wheel, use the index finger and thumb of the hand holding the rod to hold the main line with a towel. This will wrap the thread tighter. As shown in the picture:
How to tie the line to the fishing reel on the sea pole
After putting two loops on the line cup, just rock the wheel to reel in the line. Even if the line is placed at the head, it will not run away. Off the line. As for the thread clip on the fishing reel, it is best to pin the thread end of the 8-sub loop to the clip when the fishing reel is not in use after retracting the line to prevent the fishing line from loosening.
How to tie the line to the sea rod wheel
First open the line cup holder and tie a loose line sleeve similar to a horse lasso, put it on the line cup, tighten it, and then put away the line cup holder Now you can start winding!
How to install a fishing reel on a sea pole
First use one end of the line to tie a knot on the line cup of the fishing reel, then pull the line with one end and shake the other end. Fishing reel, the tighter it is, the better! It can be installed with two people, one holding the line, and one person rocking the wheel is even better!
How to tie line to a fishing reel?
I’m really ashamed to say that I really didn’t know that the card on the reel is for thread. I learned from the original poster: handshake. The loops on the sea pole I use are relatively small, so the thread is average. Neither will come out of the ring. This is the tip line set of the Jiji pole (the same as the Taiwan fishing line set). When not in use, just put away the thread and put on the pole cap. This is the thread tip of the sea pole, mainly used for string hooks and explosive hooks. There is a connecting ring added to the thread and the string hook can be hung directly when in use. When using an explosive hook, I like to thread the sinker with a piece of fishing line alone, knotting both ends of the line (a pendant), connecting one end to the main line and the other to the explosive hook [] View original post>>
Please be satisfied Adopted
How to tie the line to the sea pole
1. Fix the fishing wheel to the sea pole, pass the main line through a wire loop of the sea pole, and then tie a double knot at the end of the main line Small ring. As shown in the picture:
2. Pass the main line through the small ring to form a large ring. As shown in the picture:
3. Open the outlet ring of the fishing wheel, and put the big ring on the line cup in the opposite direction. If the line cannot be wrapped, when winding the line on the rocking wheel, hold the rod with a towel with your index finger and thumb. Main thread, this will make the thread tighter. As shown in the picture:
How to assemble the sea rod and how to draw and use the reel?
Assembly method and winding of sea pole
Connection method of main line, pole tip and eight-shaped ring
1. General connection method. As shown in the picture, fold the main line back and tie a dead knot.
Second, the tighter the knot is, the more serious the thread will be injured and the easier it will be to break. This is commonly referred to as low tensile strength of nodules. The problem lies in this dead link. To put it bluntly, it is because of the dead knot that the main thread is easily broken at the dead knot.
This connection method is simple and convenient, and is suitable for fishing small fish. Because the pulling force is not large, even if there is a dead knot, the main line is not easy to break. However, it is different when fishing for big fish. The pulling force is large and the main line of the rod is easy to break, which is a problem that needs to be solved. To fundamentally solve the problem, we should avoid tying knots on the main line. {Following this idea, we can design several connection methods without dead knots.
How to use
Selection and application of sea rods
Principles for selecting sea rods: length and hardness of sea rods: if you want a sea rod to cast far, is the subject. Generally speaking, long rods will cast farther, and short rods will cast closer. The hardness of the rod is also closely related to the casting distance. A soft rod is very responsive but difficult to cast far; a hard rod is easy to cast far but not very responsive. Therefore, when choosing the soft and hard rods, we should generally consider the fishing goals and usage methods. Generally, when fishing for big fish or when fishing with a hand-held rod, choose a medium-hard rod with good elasticity. When fishing for small fish such as sea bream, you should place the rod and look at the tip of the rod. For signal fishing, you should choose a soft rod. The main advantage of the sea pole is that it can cast a long line, catch big fish, and it is convenient to walk the fish and run away with less fish. Therefore, casting the sea rod far is a key factor. The main factors for choosing a sea rod are as follows.
1. Choose a sea rod according to its purpose: a sea rod can be used for sea fishing and freshwater fishing. If conditions permit, sea fishing rods and freshwater fishing rods can be purchased and used separately. If the length of the sea rod for both freshwater and sea use is taken into account, the rod length is generally 2.1-2.4. Big savings can be made.
2. Selection of freshwater fishing and sea rods: Sea rods for freshwater fishing are generally used in large water surface environments, such as reservoirs, lakes, and large fish ponds. The length is generally 2.7-- 3.1 meters is appropriate. If you often fish in waters with wider fishing spots, a sea rod of this length is most suitable. If the area of ??the fishing spot in the water environment where fishing is performed is small, the length of the sea rod should be 1.8 to 2.4 meters.
If the pole is too long, the pole head, pendant, and hook assembly can easily get caught on trees, stone walls, and other obstacles behind you when throwing, causing accidents such as broken poles and line damage. In addition, the small space may cause psychological interference during throwing, resulting in inaccurate positioning. Situations such as insufficient investment may occur. Various factors affect fishing performance.
3. Selection of sea fishing rods: Sea fishing methods include boat fishing, rock fishing, deep sea boat fishing, etc. Rock fishing and deep sea boat fishing have their own special equipment, which will not be discussed here. Here We usually fish for boats and rows. The fishing environment for boat and row fishing is generally very small. The boats available for sea fishing along the coast of Fujian generally can accommodate up to 3-4 people and 9 poles, which is already very crowded. If you use a sea pole with a length of more than 3 meters, the pole body must run across both sides of the hull, which will cause great inconvenience to the fishermen's activities. If you are not careful, it may cause accidents such as overturning, crushing and breaking of the pole. In addition, because the fishing environment is mostly aquaculture areas, fish rows are crisscrossed in the sea area and underwater ropes are crisscrossed. The fishing space between rows is only 1-2 meters. Fishing is mostly done vertically, and long-distance casting is impossible. Therefore, it is not recommended to use long rods. The length of the rod is generally 1.8-2.4. It is advisable to use a short pole for sea fishing from a boat, which has the advantages of flexible and convenient operation.
How to install the line on the sea pole? It requires 40 minutes of steps
Some sea pole diagrams and line sets are as follows (for reference):
Sea pole line set 1 (bottom-sinking double hooks)
2. Double pendant fishing floating line group
3. String hook fishing bottom line group
Sigong floating string hook line group (when the floating force is equal to the weight of the lead pendant and bait hook, you can fish floating )
5. Use space beans to control the movement distance of the lead drop on the main line to about 15 cm, forming a semi-living drop
6. Mine and water monster line set (a weapon for fishing silver carp and bighead carp! ! )
How to disassemble and assemble the sea pole reel
Winding method 1. Check the winding amount of the reel (usually marked on the reel or packaging box), select Suitable fishing line model. 2. Install the fishing reel on the fishing rod and close the backstop switch of the fishing reel. 3. Knot one end of the line, pass it through a guide ring of the fishing rod, open the outlet ring of the fishing wheel, tie the line to the reel, close the outlet ring, stretch the fishing line, and check to ensure that it is firmly tied. sex. 4. Keep the fishing line straight and tight, and start to rotate the fishing wheel rocker at a constant speed to wind the line. 5. When the line wrapping height is about 1.5-2 mm lower than the edge of the reel, do not wrap more or less, otherwise it will prevent you from casting the line correctly. Keep the fishing line straight and tight, stop tangling, and cut the fishing line. 6. Then fix the fishing wheel on the fishing wheel seat on the fishing rod and you are ready to fish. Although the drum fishing reel is small in size, its line capacity is comparable to that of the spinning reel. How to install the reel: 1. Install the fishing reel on the fishing rod (in the combined state). 2. Turn on the fishing wheel check switch, open the fishing wheel outlet ring, pull the line out, close the outlet ring, and pass the line through the fishing rod guide ring in sequence. 3. Tie the falling line, tighten each section of the fishing rod, and close the backstop of the fishing wheel. Throwing line method 1. Turn on the backstop switch of the fishing wheel, turn the rocker, adjust the line to drop to the appropriate position, and close the backstop switch. 2. Hook the fishing line with your index finger, turn your head sideways, and send the rod backward. The distance between the rod and the ground should be such that the line falls and touches the ground. 3. Send the rod sideways forward. When the rod is in front of the side and holds a 45-degree angle to the ground, shake the line loosely and the line will fall. 4. When the line falls into the water and the line feeding is completed, shake the rocker, close the line outlet ring, tighten the fishing line, and place the rod on the rod holder. Method of taking up the line 1. Lift the rod and stretch it, keep the fishing line tight and straight, and place the rod at a 45-degree angle on the ground. 2. Rock the wheel at a constant speed, keep the fishing line tight and straight, and adjust the tightness knob of the fishing wheel according to the strength of the fish. 3. After collecting the fish, place the rod on the rack. Do not let the fishing wheel touch the ground and get dirty or scratched. Wheel removal method 1. Turn off the backstop switch and remove the wire drop. 2. Tighten the thread with your fingers and shake the rocker. 3. Attach the thread to the reel thread piece. 4. Remove the wheels, clean them, and install them.
How much line should be installed on a sea pole fishing vessel and how to install it
Tie the end of the thread on the line cup, then shake it, hold the line with a towel, otherwise it will be very useful if it is wrapped
>