How to install the hinge?
Hinge installation method:
1, when installing hinges, first determine the minimum margin between cabinets or doors. Generally, when installing the cabinet door hinge, we must calculate the margin between the cabinet door and the smallest door. If the calculation is not good, the cupboard door is easy to collide, which affects the appearance of the cupboard and is not practical.
2. After determining the distance between the installed door panel and hinges, we will actually install them according to the number of hinges selected by the cabinet door. The number of hinges mainly depends on the height of the installed door panel. Generally speaking, for door panels with a height of 1500mm and a weight of 9- 12_, we should choose about 3 hinges.
3. Moreover, the installation mode is also very important when the cabinet doors are installed in linkage. According to the position of the door edge and side plate, the door can be divided into three installation methods: full cover door, half cover door and embedded door. Generally, the full cover door covers the side panel, and the half cover door covers half of the side panel, which is especially suitable for cabinets with partitions in the middle and need to install more than three doors. Embedded doors are installed in both side panels.
4. When the door is installed and connected, you must first determine the position with a measuring pencil or a carpenter's pencil, and the drilling allowance is generally about 5 mm. Then, use a pistol drill or a carpenter's hole to make an installation hole of about 35 mm on the door panel, and the drilling depth is generally about12 mm. Then, put the door hinge into the hinge cup hole on the door panel and fix the hinge cup with self-tapping screws.
5. Then we will insert the door hinge into the cup hole of the door panel and open it, then insert the side panel and align it, and fix the base with self-tapping screws. After that, we will try the effect of opening the door. Generally, the door hinge can be adjusted in six directions, and the left and right positions of the two doors should be adjusted up and down. Generally, the distance between two doors after installation is about 2 mm
Precautions for hinge installation:
1. Before installation, observe whether the parts of the hinge that need to be connected are consistent.
2. Check whether the length and width of hinges and connectors are appropriate. If a side panel is shared, the total interval should be two minimum intervals.
3. If the covering distance of the fixed machinery is correspondingly reduced, it is necessary to adopt a hinge with a bent hinge arm.
4. When linking, it is necessary to check whether the hinges match the connecting screws and fasteners, and select the maximum available size of each hinge according to different conveyor types.
5. When installing the hinge, ensure that the hinge and the fixed object are on the same vertical line, so as to avoid dislocation of mechanical objects or abrasion of the conveyor caused by unstable fixation.
This is how to install the hinge brought by Bian Xiao. The whole contents of hinge installation method and matters needing attention.