Gate size standard

Do you pay attention to the size of the gate at home? I don't know what house your house is. If it is a bungalow, the gate can be as wide as it wants. If it's a building, it won't work. Normal entrance doors are all 80 cm, and some can be between 90 cm and 1 m!

The standard entrance size is generally 1 170mm high and 2050mm, and the reserved area should be widened by 25mm and raised by 20 mm.

In the building code, the size of the door is 1. Door height: the height of a door for people to pass through is generally not less than 2m, and no matter how high it is, it can't exceed 2.4m, otherwise it will feel hollow, and the production of door leaves needs special strengthening. If you need modeling, ventilation and lighting, you can add a waist window to the door, starting from 0.4m in height, but not too high. The door for vehicles or equipment to pass through should be determined according to the specific situation, and its height should be 0.3~0.5m higher than that of vehicles or equipment, so as to avoid the collision between vehicles and door frames when the equipment needs to be transported by rollers. As for the clearance requirements of various vehicles, refer to the corresponding specifications. If it is a large-scale and large-space building, such as stadiums, exhibition halls, etc., when it is necessary to set a super-large door, you can add a conventional size attached door to the door leaf for people to pass when it is not necessary to open the door. At present, there are many inspection doors for all kinds of equipment tube wells in buildings, which are not often used, so the height of the upper frame is generally the same as or lower than that of ordinary doors, and there is a threshold with the same height as the skirting line below, so the clear height need not be limited to about 2m,1.5m.. 2. Door width: general door is 0.9 ~ 1m, sub-room door is 0.8~0.9m, kitchen door is about 0.8m, and bathroom door is 0.7 ~ 0.8m Due to the migration of modern furniture, the upper limit size is currently adopted. The width of public buildings is generally single door 1m and double door1.2 ~1.8m.. If the width is wide, the manufacture of door leaves should be considered. The width of door leaves with double doors or multiple doors should be 0.6 ~1.0m. The width of emergency exits for safe evacuation should be set according to the calculation and specifications (relevant fire codes). Doors with pipes for maintenance are generally 0.6m wide. In addition to its own width, the door through which motor vehicles or equipment pass should have a gap of 0.3~0.5m on each side. By the way, the size of the manhole should not be less than 0.6m×0.6m

Hope to adopt

The size of the gate The size of the courtyard gate is the following auspicious size. The gate conforms to the talent of heaven, earth and people, and is the three blessing doors of happiness and longevity, which can be applied to all aspects of indoor layout.

1 inch (3.2 cm) is the "wealth" in Lubanchi;

6 inches (19.2 cm) means "righteousness";

1 foot 6 inches (51.2cm) is "wealth".

2 feet 1 inch (67.2 cm) means "righteousness"

2 feet 8 inches (89.6 cm) is "Ji"

3 feet 6 inches (1 15.2 cm) means "righteousness"

5 feet 6 inches (179.2 cm) is "Ji"

7 feet 1 inch (227.2 cm) is "Ji"

7 feet 8 inches (249.6 cm) means "righteousness"

8 feet 8 inches (28 1.6 cm) is "Ji"

1 sheet 1 inch (323.2 cm) is "wealth"

Small single door should be 2 feet 1 inch: that is, 67.2 cm is the "righteous door".

A single door should be 2 feet 8 inches: that is, 89.6 cm is a "lucky door"

Small double doors should be 4 feet 3 inches 1 min: that is, 137.92 cm is the "auspicious door".

Double doors should be 4 feet, 3 inches and 8 minutes: that is, 140. 16 cm is the "financial door"

The double doors should be opened at 5 feet, 6 inches and 6 minutes: that is, 18 1. 12 cm is the "auspicious door".

Caimen or Yimen:

1, width 1470, height 19 10.

2. Width 1547. Height 2 180

What is the difference between "Ben" and "Cai Zhi" in Lubanchi?

1. Lu Banchi is also called class ruler, door ruler, door ruler and eight-character ruler. Lu Banchi is a traditional building ruler in China, which is used to control the size of furniture and houses. Due to the control of Lu half a foot, it just avoids the resonance frequency band of the secondary wave. When decorating your home and buying furniture, measure it with Lu Banchi, and try to choose auspicious size. In fact, this Lu Banchi is not a ruler, but a comparison table. 1 half a foot = 1.368 city scale =45.6 cm; Usually the length unit has the "carry system"; For example: 1 ft = 10 inch, 1 inch = 10 minute, which means this is 10 decimal. Lubanchi, on the other hand, has no "carry system", only words indicate good or bad luck. The first row of eight characters "1 wealth, 2 diseases, 3 divorces, 4 righteousness, 5 officials, 6 robberies, 7 harms and 8 books".

Second, the use of Lu Banchi:

1, good or bad judgment: a square ruler, length 10 city inch, that is 1 city ruler; Every inch is marked with colors, namely: one white, two black, three green, four blue, Huang Wu, six white, seven red, eight white and nine purple; Take the inch as the standard, and one inch, six inches and eight inches are auspicious; To put it bluntly, the size of the door should be one inch, six inches and eight inches, which is a good door.

2, the number of Lu Banchi and the use of a ruler: Lu Banchi sold in the market are marked with red and black, and it is lucky to put the required length on the "red" of Lu Banchi. Then measure it with a ruler. If you put the required length on the ruler "white (one white, six white, eight white)", it is auspicious.

The size of the inner door is more or less in line with the regulations of 4 Sichuan 2. 1 Chinese wooden door. The dimensions of internal doors are: 700 mm x2000 mm, 760 mm x2000 mm, 800 mm x2000 mm, 90 mm x2000 mm, 700 mm x2 100 mm, 760 mm x2 100 mm, 800 mm x2 100 mm. 900 mm x2 100 mm, 1200mm x 26500mm except these, everything is non-standard; However, due to functional requirements, many indoor doorways are not designed according to this size. Interior door size: width: 80-95; Height:190,200,210,220,240 bathroom and kitchen door dimensions:

How big is the door of the house? According to the residential design code, the size of the door should not be less than the following table.

Category Hole Width (m) Hole Height (m)

Public outer door 1.20 2.00

Door (cover) 0.90 2.00

Living room (hall) door 0.90-2.00

Bedroom door 0.90 2.00

Kitchen door 0.80 2.00

Toilet door 0.70 2.00

Balcony door (single fan) 0.70-2.00

Design is generally designed according to this standard. The entrance door of some luxury houses will be relatively large, and the general practice is the mother door of1.2m and the opposite door of1.5m or1.8m..

What is the standard room area in China? First of all, the standard size of wooden door openings is generally 2 100 (height) *900 (width) * 150 (wall thickness).

Of course, the wall thickness is naturally generated, and the common wall thickness is 130 150, also called standard!

What I just said is the standard size of the door, which is the clearance size of the hair hole!

The size of the door needs to reduce the installation gap, and the installation gap of general height and width should be reserved about 2 cm!

That is to say, if it is 2100 mm * 900 mm *150 mm, then the door can only be 2080*880* 150.

I hope my answer can help you.

Excuse me, what is the size of a general household door? Width 1 m, height 2 m.

What is the size of the general residential entrance door? The single door is usually 900- 1000mm, and the mother door is usually1200 mm. Look at the local code, such as Shanghai code, at least 1000 is needed.

What is the size of the general entrance door? How to choose the entrance door? The entrance door is a must for every household! But how much do you know about the size of the entrance door? Let's have a look! According to the residential design code, the minimum width of the public exterior door opening of a unit room is 1.2m, the entrance door, living room (hall) door and bedroom door are generally 0.9 or 1m, which shall not be less than 0.9m, the kitchen door shall not be less than 0.8m, the bathroom door and balcony door shall not be less than 0.7m, and the height of the above openings shall not be less than 2.0m Villa-style houses can be

The entrance door is the first door to enter the house. Because of its high anti-theft performance, it is also called anti-theft door. According to the material, the entrance door is mainly divided into five types: iron gate, stainless steel gate, copper gate and armored door, among which the iron gate and stainless steel gate have moderate performance and price, which are suitable for general residential use; Copper doors are good in fire prevention, anti-corrosion, prying prevention and dust prevention, but the price is high, so they are suitable for high-grade houses such as villas. No matter what kind of door, the safety also depends on the firm door lock. It is recommended to use a new type of steel anti-theft lock, and choose double-sided double-row bullet slots with blades or arc lock cores next to it, which has the highest safety factor (it takes a skilled locksmith one hour). Market observation: the only way to buy doors and windows

Interior door: select as required

The choice of indoor doors depends first on the door opening mode, such as horizontal opening or push-open, left opening or right opening, internal opening or external opening, etc. , so as not to waste indoor space and cause inconvenience.

The common types of indoor doors are burn-free doors, burn-free doors, steel wooden doors, solid wooden doors and so on. The most suitable door should be selected according to the different use space: paint-free door is the cheapest, but it is not sun-resistant, temperature-resistant and waterproof, so it is not suitable for balcony and bathroom; Painted interior doors have high cost performance and stable physical and chemical properties, and are the mainstream choice for applicable spaces: bedrooms, study rooms, bathrooms, kitchens, etc. The price-performance ratio of steel wooden doors is similar to that of painted doors, but it should be noted that the steel plates will have pits after being hit and cannot be restored to their original state; Solid wood doors are high-grade and beautiful, comfortable to the touch and highly environmentally friendly. The disadvantage is that it is expensive and can be used in luxury bedrooms and study rooms.

The above is some sharing about buying the entrance door. In addition, the maintenance of the entrance door is particularly important. Only when the maintenance is in place can the service life and aesthetics of the door be maintained! The maintenance of doors made of different materials varies greatly, so I won't go into details here.