1, traditional sheet metal repair, sheet metal repair is to repair the deformed part of the automobile metal shell. For example, if the car body shell is knocked out of a pit, it can be restored to its original state by sheet metal, and then the deformed car metal surface can be restored to the same brightness as other intact places by spraying special paint.
2, the small pit in the car needs to be pulled first, and the palm-sized pit is difficult to scrape if it is scraped directly, and it will crack after a long time.
3. Draw gold first, pull the pit, then scrape the gold ash, then polish, scrape the ash after leveling, then water mill, then paste the covering paper, then paint, and then polish. You can't handle it yourself. Need to go to the repair shop or 4S to paint the body panels.
Three or four hundred yuan to repair the car body sag:
1, it depends on what brand of car you are, where to repair it and the degree of damage. If it's a bus from 10 to 15000, it takes 300 to 400 yuan to go to a general repair shop.
If there is a car accident, it depends on who is responsible for the accident. Whoever is in charge will go to the 4S shop where the car was bought. The reason to go to the 4S store is to buy insurance, so you don't have to pay for it yourself. If you don't buy insurance, you will have to find a better place. It seems that the place where the car is repaired costs different money.
If the scratches are not too big, I will drive the new car I bought at that time, and I will repair any scratches. Now I think it will cost a lot of money. In that case, it is estimated to be 300 to 500. This is just my reference, but it will never exceed 500.