This is the regulation on 03G 10 1- 1, but the basement on 03g101is not allowed to have external walls, so horizontal steel bars can be placed inside vertical steel bars.
Walls can be divided into load-bearing walls and shear walls according to their mechanical characteristics. The former mainly bears vertical loads, such as masonry walls. The latter mainly bears horizontal load. In seismic fortification areas, horizontal loads are mainly generated by horizontal earthquakes, so shear walls are sometimes called seismic walls.
Extended data:
Types of shear walls:
1, integral wall
When doors and windows have no openings or only a few openings, the existence of openings can be ignored. This kind of shear wall is called integral shear wall.
When the sum of the hole areas of doors and windows does not exceed 15% of the lateral area of shear wall, and the clear distance between holes and the clear distance from the hole to the wall is greater than the long side size of the hole, it is an integral wall.
2. Integral wall with small opening
The size of the hole of doors and windows is greater than the whole wall, and local bending moment has appeared on the wall limb at this time. This kind of wall is called the whole wall with small openings.
3, even the limb wall
The shear wall has one or more rows of holes, and size of the hole is relatively large. At this time, the stress of shear wall is equivalent to a series of wall limbs connected by connecting beams between holes, so it is called coupled limb wall.
4. Frame-supported shear wall
When the ground floor needs more space, the frame structure is used to support the upper shear wall to form the frame-supported shear wall. Pure frame-supported shear wall structure is not allowed in earthquake area.
Baidu encyclopedia-shear wall
Baidu encyclopedia -03G 10 1- 1