First, the construction method of traditional ceramic tile external angle and internal angle
In the traditional home decoration, we will take a 45-degree angle to polish the edges of the tiles, and then in the decoration construction, the overall appearance of this mosaic is very good.
Second, the use of Yang Angle line
The outer corner line is used for protection. However, with such decoration, the tiles also need corner grinding, which will not reduce the process and time of corner grinding of tiles.
Third, what is the difference between the two processes?
Chamfering is to turn the back of two bricks upside down. Touching together to form a right angle will wrap the external angle, which is a traditional and most beautiful way to deal with the external angle, but it also tests the skills of pavement workers.
45? The angle is not really 45 degrees, but about 30 degrees, so that there can be a gap between the two bricks, which can be used to fill the adhesive in the future. It is worth mentioning that the tile cutting should not be too thin, because it is easy to destroy the glaze layer on the surface of the tile, and it is easy to crack the tile at the later joints, and it is difficult to repair.
Yang angle line, also called Yang angle convergent strip or Yang angle strip, is mainly made of stainless steel, PVC, ceramics and other materials. The outer corner strip can be used directly without chamfering, and its corners are smooth, which can protect the corners and is relatively safe. Because the installation is convenient and simple, it is also a common treatment method at present.
Fourth, the role of ceramic tile corner line
At the junction of the walls of the family, there will be a yang angle. After living for a period of time, some owners will find that the original neat and beautiful tiles have a lot of fragments at the chamfer, and even the wall foundation will be seriously exposed. These tiny fragments can't be repaired, which affects the appearance. In fact, the owner can completely solve this situation by using the corner line in the decoration.
Before we understand the Yang angle line, let's look at the Yang angle and the Yin angle. Where there is a positive angle, there is a negative angle. Positive angles are convex angles and negative angles are concave angles. Yin and Yang corner lines correspond to them respectively, which are not only decorative lines that wrap corners, but also have a good protective effect on Yang corners. After living in the house for a period of time, some owners will find that the original neat and beautiful tiles have many fragments at the chamfer, and even the grassroots of the wall will be seriously exposed. These tiny fragments can't be repaired, which greatly affects the beauty of the wall. In fact, these problems can be completely solved when dealing with the external corner line during decoration.
Then a small business owner said, what if I just don't install corner lines? In fact, the external corner line of ceramic tile is very important. If it is not installed, corner grinding is needed during tile construction. Tile corner grinding requires a lot of work, and the technical requirements for workers are very high. Some poor quality tiles will have the phenomenon that the edges of tiles are not straight, which is easy to burst when polished. Moreover, after the edge of the tile is polished, the edge of the tile becomes thin and brittle, and fracture is common. After a long time, there will be cracks in the joints of ceramic tiles, which will become dirty and difficult to clean. Moreover, the noise and dust pollution caused by grinding do not conform to the trend of environmental protection.
5. How to operate the external corner line of ceramic tile?
Having said so much about the role of the outer corner line, I believe many small partners have begun to ponder how to install it. Let's take a look together.
1. Fix the corner line at the installation place with three nails, so that the corner line of the ceramic tile is parallel to the wall.
2. Under the condition that the corner line of the external corner is fixed, when paving the tiles at the corner and the other side, a space with the same thickness as the tiles is reserved for connecting the corner lines of the tiles.
3, first with cement mortar dark Yang Angle line into a figure of eight. When doing this step, everyone should pay attention to the thickness of wall plastering and the air raid on window frames and walls.
4. On both sides of the Yang Angle line with cement mortar. Remember that this mortar should not be too thick, 125px is enough.
5. After plastering, clamp the square foot on one side of the external angle with a steel bar chuck, and then correct it with a wire hammer.
6. Continue to smear in layers until both layers become open, and then compact.
7. Apply ceramic tile adhesive or cement to the corner line of ceramic tile, and paste the ceramic tile to keep the cambered surface of the corner line of ceramic tile close to the joint of ceramic tile.
8. Tile the other side, and press the corner line with the tile to keep the contact between the corner line and the tile smooth and seamless.
9. When the tile is laid, the corner line and cambered surface of the tile are cleaned, and the installation is completed.
Many friends think that everything will be fine when the tile corner line is installed, but it is not, and the later acceptance work is equally important. In order to pave the corner line, material selection is very important, and construction technology is also very important. In addition, there are two kinds of outer corner lines: inner corner and outer corner. You can choose the one that suits you according to your own needs. The function and operation method of tile corner line are introduced here today. I hope you can use it when laying corner lines.