Introduction of hollow louver glass
1. insulating glass refers to a kind of glass made of more than two pieces of glass bonded by science and technology. It has the characteristics of sound insulation and heat insulation, and is a new building material that can reduce the weight of buildings.
2. Hollow louver glass may be too professional for many people to understand. In fact, the hollow louver glass window is a kind of sunshade product that we often see. It adopts advanced scientific and technological methods to install venetian blinds in insulating glass, and uses magnetic force to control venetian blinds, which can be flipped at will. Venetian blind placed in insulating glass can not only effectively save space, but also play the role of shading. At the same time, the heat-insulating louver glass can effectively isolate noise and play the roles of heat insulation, wind prevention and heat preservation. This is a necessary curtain for many modern rooms.
3. Hollow venetian blinds has a wide range of applications, which can generally be used in rooms, shopping malls, factories, tall buildings, high-rise buildings, coastal buildings and other places, and can also be used to replace our traditional curtains.
How to install hollow louver glass?
A, tools and materials before installation inspection:
Before installing the insulating glass with built-in louvers, check whether the installation tools are complete and whether the required materials are in place, such as gaskets, rubber strips and sealant. , and check whether the built-in louver insulating glass works normally and whether the corresponding window frames are in place. (Remember to erect the insulating glass with built-in louvers, and install and debug everything by magnetic control hand. )
Second, cleaning and verification:
1. Clean the glass surface first, such as dust, oil and other dirt, and clean the mortar slag and foreign bodies in the glass notch to make the drainage holes unblocked.
2. Check whether the variety, size and specifications of the glass are correct and whether the window sash is flat and firm.
Third, the glass installation
Place the insulating glass with built-in louvers in the middle of the sash slot, and the gap between the inside and outside is not less than 2MM. After assembly, the gap between the glass and the mosaic groove should be ensured, and the main components should be equipped with damping pads to buffer the impact of the opening and closing force.
Four, fixed with rubber battens
After the glass is installed, rubber battens should be embedded in the glass in time to seal both sides, and then the glass agent should be tightened. The specifications of rubber bead should be consistent with the actual size of the groove, and the embedded bead should be close to the glass and glass notch. During installation, it is not allowed to shift or forcibly fill the layering to prevent the glass from cracking due to greater installation stress.
Follow-up work after verb (abbreviation of verb) is installed:
1. After the installation is completed, check whether the glass rubber strip is set correctly, so as to prevent the drainage channel and drainage hole from being blocked. Fix the glass after checking that there is no problem.
2. When the installation area of insulating glass and glass is more than 0.65m2, the glass should be placed on two identical locating blocks, and the distance between the placing point and the vertical edge of the glass should not be less than 1/4 of the glass width and 150 mm. For the glass located in the fan, the location of the locating block should be determined according to the opening mode, and the width of the locating block should be greater than the thickness of the glass and the length should not be less than 25mm.
3. Clean the glass surface and close the window sash to prevent the glass from being broken by the wind.
4, quality standards, to ensure that the built-in louver insulating glass size is correct, the installation must be flat and firm, no looseness,
5. The rubber sealing strip must be plugged, the edges and corners should be opened neatly and firmly bonded.
6. Glass corner caulking should be dense, the cutting angle should be neat and splayed, the surface should be neat and smooth, straight and without dislocation, and there should be no pollution outside the seam.
7. Drainage channels and drainage holes.
9, glass and sealing strip (glass glue), glass and notch bonding is firm, no empty drum.
The above is a brief introduction of hollow louver glass, a new sunshade material. I believe everyone has a certain understanding of hollow louver glass. In fact, the hollow louver glass is not so mysterious. With the gradual recognition of everyone, hollow louver glass will be more widely used. The installation of hollow louver glass is also very particular, which can be handled carefully according to the method in this paper to ensure the construction quality.