The installation of the lure rod is as follows:
Lure fishing is a fishing method that has become popular in recent years. Compared with traditional fishing methods, it adopts lighter and more sensitive techniques. It requires Use certain professional equipment, including lure rods, lure line sets, lure baits and other fishing tackle. When using a lure rod, it is also particularly important to understand the correct rod installation method.
1. Preparation work
Before starting to install the lure rod, you need to prepare the following items: lure rod, vehicle hook, fishing line, hook, solid bait and bait box. Once you have all these tools ready, you can start with the following steps.
2. Rod body assembly
First, remove the protective cover from the lure rod and apply a small amount of grease on the rod. This can help reduce the size of the rod and the lock. The friction between them improves the convenience of pole removal. Then take out an embroidery needle or other small tool, pop up the lock, pull out the assembly sequence starting from the top layer, and then insert the rod head part into the bottom component.
If your lure rod comes with a plug, you only need to insert the plug into the bottom assembly. For a coupler with a built-in nylon lightweight line loop, you need to press the front end of the elevated frame with your middle finger to ensure that the line loop is as close to the bright side as possible, with a hook on the bright side, and a hook with the same constant underground fish tissue on the other side. .
3. Selection of bait
The bait required for lure fishing is more complex and sophisticated than other fishing methods. When selecting bait, it is necessary to comprehensively consider and formulate corresponding techniques based on multiple factors such as the actual local conditions, aroma, quality, and taste. It should be noted that using inappropriate bait and techniques may cause unnecessary waste, so do your homework before fishing.
4. Hang up the hook set
Put the small diameter wire into the head assembly, make sure there is no interference with the connecting surface of the assembly, and then use your thumb handle to hold the flip buckle of the pole Release while catching the head assembly's vertical fishing ring and try to pull and adjust the angle so the head assembly is inserted correctly. Then use the elastic piece to flexibly insert the elastic piece into the hook group, and wind the figure-eight knot to enhance the stability of the connection.
5. Adjust the length of the lure rod
Since different fishing places and fish species have different requirements for elastic lure rods, adjustments need to be made according to specific conditions. Generally, the length of the flexible lure rod should be comparable to the length of the selected hook set and accommodate the required sensitivity and elasticity. You can do some trial fishing, constantly adjust the length of the lure rod, and find a fishing rod posture that suits you.