First, curtain rail installation, curtain rail before installation, first check whether it is straight, if any, it should be straightened before installation, so as to facilitate the use in a straight line. The bright curtain box should be installed first, and the dark curtain box can be installed later. Track can be divided into single track, double track and three track. When the width of the window is larger than 1.2m and the curtain is a monorail, it should be disconnected in the middle, and the disconnected ends will be twisted and dislocated.
B, curtain and curtain rail connection, fabric curtain and curtain rail connection is achieved through hooks, common hooks include curtain fabric folding hook, belt clip hook, needle hook, round hook, etc. Installation of folding hooks. The method of fabric curtain wrinkling is to sew a special cloth strip on the fabric curtain, then put the four wrinkling claws of the folding hook into the seam of the special cloth strip to wrinkle the fabric curtain, and then hang the fabric curtain with the hook of the folding hook.
It is relatively simple to install with a clip hook, as long as the upper edge of the curtain is clamped with a clip first, and then the fabric curtain is hung on the pendant of the curtain rail with a hook part, or the hook is hung on the pendant of the curtain rail first, and then the fabric curtain is clamped with a clip. When installing the needle hook, it is required that the maximum fold of the curtain is about 4㎜. When installing, the needle is inserted into the fold of the curtain, but the needle bar is not exposed.
C, the installation of the hanging roof curtain, when installing the hanging roof curtain, first nail a row of small nails on a small piece of wood, the nail distance is about 50㎜, press the end of the hanging roof curtain with flanging, firmly nail it on the curtain box or hanging roof curtain bracket, and turn the hanging roof curtain down after nailing.
2. Installation of aluminum alloy shutters
The aluminum alloy venetian blind is made of aluminum-magnesium alloy louvers connected in series by trapezoidal nylon ropes. This is a curtain that can adjust the light entering. The angle of the shutter can be rotated at the same time 180 degrees. According to the needs of lighting brightness and ventilation, pull the nylon rope to adjust it at will.
A, side loading, traditionally side loading, because the installation is more convenient and firm.
B, high-altitude installation, using high-altitude installation, is a common installation method when the side of the window frame cannot be installed. It is more difficult than side loading, so it is used less.
C. When the blinds are installed outside the window, they should be released for 20-30㎜ on both sides in the height direction. When installed in the height direction, it is best to be about 100㎜ higher than the upper window frame. The specific dosage can be selected according to the actual situation. When installing blinds in the window frame, 20㎜ should be subtracted from the height and width of the window frame.
3, brocade vertical curtain installation
Brocade vertical curtain includes woven cotton series and brocade PVC series, which are woven from non-woven fabrics and silk and hemp, and are called brocade series. It has the advantages of soft texture, elegance, soft tone and rich colors. After spraying PVC on brocade, it is called brocade PVC series, which integrates soft and hard materials. It is novel and unique, with both the warm and soft characteristics of brocade and the hard and opaque advantages of PVC plastic. The installation of brocade vertical curtain is basically the same as that of aluminum alloy louver.
4. Installation of plastic shutters
The installation method, lifting adjustment and angle adjustment of plastic louver are the same as those of aluminum louver. Be careful not to get close to high temperature. When pulling the lifting and steering ropes by hand, excessive force should not be used. When adjusting the height of the curtain, you should pull two hanging ropes at the same time to avoid tilting. If there is dust on the page, you can brush it off with a feather duster or wipe it off with a wet cloth, or you can take it off and wash it with water.
5, LCD glass curtain wall installation
From the outside, liquid crystal glass is a kind of glass installed on the window, which plays the role of ordinary glass when there is no electricity. After electrifying, the glass turns white, and both sides of the glass are opaque. It can absorb more than 30% of ultraviolet rays and control 70% of infrared rays, which is equivalent to curtains, but there is no need to install curtains. Therefore, it is called liquid crystal glass curtain wall. As a very fashionable decoration, it is mainly used in senior hotels, reception rooms and senior villas.
Precautions for installation of curtain rod
1, guarantee the specification and level.
The length of curtain rod should be greater than the width of window cover to avoid light leakage, and curtain rod should be installed horizontally. If necessary, use a ruler to monitor the smoothness of curtain rod installation.
2. Installation time of curtain rod
It is best to install curtain rods after the new house is opened or before the last cleaning. If the curtain rod is installed too early, a thick layer of dust will fall on the curtain rod. If it is installed too late, the cleaning will be in vain. At the same time, the Roman pole is best equipped with curtains, and curtain rails can be installed in advance. It is best to consider what kind of track to install when decorating.
3, installation to ensure firm
Don't pretend, it will fall off soon, which is not good. Therefore, when installing, pay attention to choose the bracket that matches the pole. If the bracket is too small, the contact surface between the wall and the bracket will be smaller, and the number or size of nuts will be limited, which will easily make the installed curtain rod unstable.