This process is very complicated, and the specific explanation is as follows:
First, about the origin of stone reliefs:
The creativity of lithograph technology originates from the artistic concept of grotto murals in Dunhuang culture in China. The first-class Myanmar metal environmental protection slate is carefully drawn by professional artists, and the oriental charm and western classic patterns are displayed in one stone.
Second, the specific process:
1, using modern technology, computer scanning and stone design;
2. Then use the machine to replace the hand carving and coloring in Dunhuang;
3. Finally, carry out anti-oxidation and anti-corrosion treatment.
4. From a professional point of view, according to the content, composition and optical refraction principle of different pictures, carefully carve and ponder, so that the shape of each stone can match the picture composition.
2. How is the seal of Chinese painting carved on the stone?
First, the choice of materials, try not to use the kind of stone you said, and the Yin Shi used for carving should be able to show artistic effect. It is difficult for ordinary carving knives to bear its hardness, and the hard and soft distribution of the stone used for carving monuments is irregular. Beginners only need to choose Yin Shi, which is cheap, not easy to break and can be stabbed. There are many kinds of Yin Shi, mainly named after the origin of Yin Shi, such as Qingtian stone in Zhejiang, Shoushan stone in Fujian and feldspar in Zhejiang. Some of them are too expensive for beginners. Generally, Qingtian stone and Shoushan stone are the main materials. This Yin Shi has moderate hardness and does not crack or stick to knives during transportation. Therefore, the carving knife can smoothly enter the stone and follow the author's intention. It also has the characteristics of absorbing color but not oil. Inks stick easily and don't dry easily. There are three kinds of lithographs: buttons, buttons-free and irregular shapes. The first two are mainly cuboids.
You should also pay attention to the following three points when buying Yin Shi: 1) Yin Shi should be firm and crack-free; 2) look for sand ingots, especially on the printing surface; 3) Pure color, no noise.
The above is the introduction of Yin Shi by ordinary seal cutting enthusiasts.
Secondly, regarding knives, Wu Changshuo-style flat single-sided knives are generally used for engraving lithographs, and medium-sized knives are generally used.
Third, other supplements about lettering.
1) Prepare tools first: carving knife, Yin Shi, Yin Chuang (this is a tool for fixing Yin Shi, which is available in the market. Generally used for printing buttons or Yin Shi, too small for the left hand to hold), inkpad, Yin Gui (Yin Gui's role is to press the seal on the Yin Gui and then print it, which is a right-angle positioning tool), paper, pen, ink, inkstone, brush, small mirror and sandpaper.
2) Carving step: Smooth the printed surface and polish it with sandpaper. First, use coarse sandpaper to quickly remove the lines or old engravings, and then use fine sandpaper to circle in the figure-eight direction, with even force to avoid uneven edges and corners.
3) Design Yin Gao: First, design on paper and choose a satisfactory final version.
4) Yin Gao Mounting: Because you are a beginner, you'd better use the watermarking method. First, put a piece of rice paper on the palm of your hand, and put the ground lithograph on the palm of your hand to press out an outline. In this outline, write in thick ink, write in thick lines in Bai Wen, and leave a sidebar for Zhu Wen. After writing, cover the stone on the outline outside the pressed paper, dip a clean pen in a little water to make the manuscript paper covered on the printed surface slightly wet, then cover it with a layer of paper to make it motionless, suck up the excess water, then cover it with a layer of paper, and grind off the manuscript paper repeatedly and evenly with your thumb nails, so as not to miss a corner, and then remove three pieces of rice paper. If there is any ambiguity,
5) Carving: brush the static stone surface, check and modify, clock seal and carve the edge.
3. How to draw a stone painting
Tools/raw materials: pencils, erasers, stones, acrylic pigments, art knives, and palette methods/steps 1 First, find beautiful stones, then wash them with clear water, soak them for a short time for health and safety, and then dry them naturally.
Choose the right stone and prepare the necessary tools and materials. Draw a pattern on the stone with a pencil, as shown. If you are not satisfied, you can erase it with an eraser and redraw it.
4 Use a brush and dip it in black acrylic pigment to deepen the sense of painting. 5. Draw a place suitable for the white part with white acrylic pigment, and 6. Draw clothes with your favorite pigment.
After painting, the rest need to be carefully revised until you are satisfied. You can try to scrape off the extra parts slowly with the art knife, but be careful. Now many people are studying the making of stone paintings. Some people say that stone paintings are spiritual works of art, because of the beauty of nature, there are all kinds of strange stones. It is precisely because of these stones that people have a richer vision and creativity, and they can paint on them in all kinds of ways.