Question 2: How to calculate the construction area of awning Code for Calculation of Construction Area of Building Engineering (GB/T 50353-2005)
3.0. 16 If the width from the outer edge line of awning structure to the outer edge line of external wall structure exceeds 2. 10m, it shall be calculated as 1/2 of the horizontal projection area of awning structural plate.
……
3.0.24 Area shall not be calculated for the following items:
……
6. Legs, wall columns, cribs, steps, wall plastering, decorative surfaces, brick-plastering surfaces, decorative curtain walls, outdoor frames (boxes) of air conditioners, bay windows, components, accessories, awnings with a width of 2. 10m or less, decorative balconies and corridors not connected with buildings.
Description of terms
3.0. 16 All awnings shall be measured according to their width exceeding 2. 10m or not exceeding 2. 10m, and those exceeding 2. 10m shall be calculated according to l, 2 of the horizontal projection area of awning structural plate. The calculation of awning with columns and awning without columns should be consistent.
In addition, the provisions of GB/T 17986 Code for Real Estate Survey may be different.
Question 3: Teacher, how is the construction area of the awning calculated? I don't know where the awning is in the picture, so it is stipulated that the awning should not record the area.
Question 4: How to calculate the construction area of the roof canopy As long as it is a canopy, the construction area can be calculated according to the following rules:
If the width from the outer edge line of the canopy structure to the outer edge line of the external wall structure exceeds 2. 10m, the area shall be calculated as half of the horizontal projection area of the canopy structure plate; If it is less than 2. 1m, the construction area is not calculated (the calculation of canopy with columns and canopy without columns should be consistent).
Question 5: How much does it cost to make a canopy? First, you have to calculate the area where you are covered by a canopy! ! Go to the market and see how many square meters there are in those awnings. Buy more, not less, because it is difficult to make up without awnings. Hehe, remember to take my advice.
Question 6: How to calculate the construction area of all overhanging awnings in buildings? The 20-point GB/T 50353 Code for Calculation of Building Area of Building Engineering has relevant explanations as follows:
1, "If the width from the outer edge line of the canopy structure to the outer edge line of the external wall exceeds 2. 1m, it shall be calculated as 1/2 of the horizontal projection area of the canopy structure plate. The calculation method of the canopy with columns is the same as that of the canopy without columns. "
2. The clauses that should not calculate the construction area include: "canopy with a width within 2. 1m".
Question 7: How does the great god with pillars calculate the canopy area and the building area according to the horizontal area around the pillars? Nothing else counts.
Question 8: How to calculate the length and width of the crown triangle? Although the crown is triangular, it has nothing to do with the bottom of the triangle. Just calculate the area of colored tiles needed for shelter from rain. This is the sum of the two sides of the herringbone that constitutes the roof multiplied by the horizontal length of the house. The calculated value is its area value.