Introduction of ground-mounted metal socket
Ground sockets are divided into two series: universal type and damping type. Modern products are mostly ultra-thin design, with uniform and delicate surface, smooth and beautiful appearance and close contact with the installation surface. When opened, the surface is slowly and evenly lifted by the damping mechanism. Compared with pop-up, it has low noise and high security.
The ground socket consists of a bottom box and an upper cover. The installation of grounding socket should be carried out in two steps. First of all, in order to ensure the smooth connection between the conduit and the ground socket and the threading of the cable, the bottom box of the ground socket should be fixed first, and the metal conduit should be reliably connected and grounded according to the relevant provisions in the construction specification.
In the installation of the ground socket, it should be noted that the upper cover of the ground socket has a certain decorative effect on the whole ground. In order to prevent its decoration from being damaged, the installation of the upper cover should be carried out in the later stage of the whole project construction.
Types of metal sockets installed on the ground
1, pop-up grounding socket
The opening plug adopts eight-character big pick, which is convenient to open. The whole curved panel is very beautiful. The front and rear screws of the upper cover are fixed, which is more firm.
2. Open grounding socket
When the plug is plugged in, the upper cover can be covered together with the plug, leaving only the plug wire for convenient passage and cleaning.
Side plug-in products are especially suitable for installation of strong and weak electricity together, which can meet the different needs of customers. Especially suitable for engineering use. 3, spiral grounding socket
A truly waterproof ground socket is the best choice for installing weak current modules. It is very convenient to drive. With leveling, fine adjustment and heightening device, because the bottom box is embedded askew or too deep, it is impossible to install the surface copper cover.
4. Sliding grounding socket
Press the button lightly, and the upper cover will automatically push forward and bounce off. When in use, the feet will not be mixed because the upper cover is opened. Eliminate hidden dangers of accidents. It adopts U series functional components, equipped with four-position three-plug function, and can also install six-position computer modules. Stainless steel cover can be used at the bottom weak current end, which is especially suitable for the installation of strong and weak current together.
5. Hidden grounding socket
It can be opened and closed by gently pressing the small middle cover, which is very convenient to use. The thickness is only 1.5mm, which can be very close to the desktop. Removable screws at both sides take off the functional component bracket,
It is very convenient to install and replace functional parts (this function is the characteristic of this product). Which brand of ground socket is better?
According to the actual needs of engineering design, reasonably select the function, structure, capacity and appearance of the product, reduce the purchase cost and construction cost of the product as much as possible, and configure the ground socket when necessary.
Generally speaking, the choice and configuration of ground socket products can be identified by brand. Major brands have the best quality (regardless of ranking): Meilan Rilan, Legrand, Simon and Siemens.
The main brands are of good quality (regardless of ranking): TCL and Qisheng.
The best materials of major brands (regardless of ranking): Simon, Mei Lanzhilan, Siemens.
Major brands have better materials (partial ranking): TCL, Qisheng, Rogland, Songri and Panasonic (except Jiadianchun).
The meat grinder is very convenient for cutting and processing fresh meat, frozen meat, pigskin, chicken skeleton, fish, fruits and vegetables. Let's see how to choose the meat grinder and how much it costs.