The tips for reversing and warehousing pickup trucks in Subject 2 are as follows:
1. Exam skills for Subject 2 - Key points for reversing and warehousing:
1. Look first when reversing Left rearview mirror, when the left rearview mirror blocks the white line, quickly turn the steering wheel to the right;
2. After seeing that the left rearview mirror is parallel to the white line of the warehouse, go straight to the warehouse. ;
3. Park the vehicle when the visual inspection position on the front edge of the warehouse is close to the left rearview mirror.
2. Exam skills for subject 2 - Key points for side parking:
1. Slowly advance parallel to the parking space and stop when pole 1 appears in the rear window of the car;
p>
2. Shift the reverse gear, sound the horn, turn on the left turn signal, and prepare to reverse into position;
3. When reversing, when the center of the small triangle of the right rear window is in contact with the No. 1 lever When parallel, turn to the right one and a half times, and immediately look at the left rearview mirror;
4. After No. 4 appears in the left rearview mirror, turn to the left and then look at the front of the car;
p>
5. The two sides of the front of the car are between poles 1 and 2, and stop (the direction does not need to be returned to the straight direction, keep the position when parking);
6. Depress the clutch, shift into 1st gear, and start the car. Turn right, blow the horn, and prepare to exit the parking space;
7. The car moves forward along the left side. When the small rearview mirror on the right side of the hood reaches pole 1, turn to the right 3 times. Exit the parking space;
8. When the front of the car is in the right direction, turn left once and continue moving forward.
3. Exam skills for subject 2 - Points for parking and starting on a slope:
1. After hearing the instruction "park at a fixed point on an uphill slope", immediately turn on the right turn signal and turn in the direction of Lean to the right side of the venue;
2. When you are about to reach the roadside, turn left for a small half circle, then quickly return to the right, so that the right side of the car is parallel to the roadside, and the distance is within 50CM ( Use the white line at the parking spot in front as a reference and do not cross the white line);
3. Depress the clutch and approach the parking spot slowly. When the small rearview mirror of the right car reaches the stop sign, apply the foot brake. Stop the car, apply the handbrake (until you hear 2 beeps), and turn off the turn signal;
4. Before starting, shift into 1st gear, turn on the left turn signal, and sound the horn;
5. Slowly lift the clutch and hold the brake handle ready to start; when the car body feels shaking or makes a gear grinding sound, release the handbrake and the car will move forward; (Here, some coaches will slowly lift the clutch and step on the accelerator to start. technology, the results are the same during the field road test).
IV. Exam Skills for Subject 2 - Key Points of Curved Driving (S-Curve): In principle, try to make a wide circle after entering the curve; when in the curve, use the steering wheel to turn the small rearview mirror on the inside hood of the car Always stay on the edge of the outer white line (specifically, not out of line, nor too far away from the edge line), and return to the positive direction at the end of the S-turn.
5. Exam skills for Subject 2 - Key points for right-angle turns: Before entering the right angle, let the car drive forward slowly and at a slow speed as far away from the sign poles at the turning point as possible on both sides of the road; When the center of the small triangular window on the car window coincides with the turning point, turn the direction to the side of the turning point to the end, and then return to the forward direction after passing through.