Introduction to the correct mopping method We always pay attention to methods, and mopping is no exception. If you want to mop the floor more cleanly, you still need to know some steps. Here is a brief introduction to the correct mopping method for everyone.
Introduction to the correct mopping method 1 Step 1: Clean up the non-stick garbage and dust on the floor with a broom and dustpan. Some people are used to mopping the floor directly, but these non-stick rubbish will bring us trouble, such as hair, which will stick to the floor when it meets water, and then it will be difficult to mop.
Step 2: Put the mop in a bucket or pool to make it fully absorb water, and then mop the floor with a little water drop, pushing and collecting it. The trick is to fill the mop with water, so that when mopping the floor, the water can reduce the viscosity of the attached substances.
Step 3: Wash the dust on the mop surface and the dirty water inside, then squeeze the water out of the mop and mop the floor for the second time. This time, take the drag bottle. With the preliminary preparation, the sticky garbage can be easily towed away.
Step 4: Of course, some sticky substances are stubborn, so we can push them with mop head's side. This can drag the side of mop head more powerfully and remove stubborn stains.
Step 5: Wet the clean rag and wring it dry, then wipe the corner of the floor in the house. When mopping the floor, you will find some corners difficult to mop. After mopping the floor, the original dust in the corner and a little sewage left when mopping the floor will greatly reduce our mopping. Therefore, a rag is necessary.
Step 6: Finally, check and drag some small things left on the floor and mop the floor. After the above steps, you will find that the floor is clean and adds a lot of bright colors to the room.
Introduction to the correct mopping method 2 How about mopping the floor with vinegar at night?
All right.
1. Alcohol and acetic acid contained in white vinegar have the functions of sterilization, cleaning, degreasing and odor removal, and mopping the floor with white vinegar can play a good role in cleaning, sterilization, oil removal and odor removal.
2. At the same time, when white vinegar mops the floor, acetic acid can be used to reduce the generation of static electricity in the air, which is beneficial to reduce the adsorption of dust on the floor and keep it clean for a long time after mopping the floor.
But after mopping the floor with white vinegar at night, there will be a smell of vinegar, and the ground is wet. It is necessary to pay attention to window ventilation 1 hour to avoid the irritating smell of heavy vinegar affecting the respiratory tract and causing physical discomfort.
At the same time, don't use acid cleaners such as vinegar on the stone floor. Marble, granite and slate will be corroded by acid.
Is it better to mop the floor with cold water or warm water with white vinegar?
Warm water is better.
On the one hand, warm water is conducive to the full dissolution of acetic acid components and water; on the other hand, warm water can maintain the activity of acetic acid bacteria and enhance the effects of deodorization, sterilization and floor cleaning, so it is better to mop the floor with white vinegar and appropriate warm water than cold water. But don't use hot water to avoid inactivation of acetic acid bacteria and greatly reduce the effect of mopping the floor.
How much white vinegar should be put on the floor?
The ratio of white vinegar to water is 1: 100.
Vinegar contains about 5% acetic acid. Proper concentration of white vinegar and brewed vinegar have disinfection and sterilization effects. The ratio of it to water should be controlled at 1: 100, that is to say, 100 ml of white vinegar has the best cleaning and sterilization effect in 1000 ml of water. If the concentration is too low, the sterilization effect will not be achieved.
way
1. Generally, drop about 5-6 drops of white vinegar into the clean water of the mop and dilute it.
2. Wash the mop in the solution for several times with white vinegar, and then put forward to wring out the water to mop the floor.
Is alcohol and white vinegar poisonous together?
There is no poison without heating.
The components of alcohol are ethanol and water, and the components of vinegar are mainly acetic acid and water. If they are mixed together, it will not change much at room temperature, but if heated, it will produce flammable, explosive and volatile ethyl acetate at high temperature, which will stimulate the eyes, nose and throat. Inhalation of high concentration of ethyl acetate will cause progressive anesthesia, acute pulmonary edema and liver and kidney damage. Continuous inhalation can cause respiratory paralysis;
People who take it by mistake may have nausea, vomiting, abdominal pain and diarrhea. At the same time, it also has sensitization effect, which leads to gingival bleeding due to vascular volume disorder; Can cause eczema-like dermatitis; Chronic effects, long-term contact with this product can sometimes cause corneal opacity, secondary anemia and leukocytosis.
Tips on how to mop the floor with tiles
1, as far as possible.
When cleaning daily, try to use a dry mop instead of a wet mop. If there are stains in some areas, household cleaners, detergent and washing powder can be used for cleaning, and vitrified bricks can be directly wiped with dry cloth or water.
2, soapy water+turpentine mopping the floor
Cleaning tiles with soapy water or a little mixture of ammonia water and turpentine can make tiles cleaner and brighter.
3. Wash the mop with running water
When cleaning the mop, it is best to clean it with running water, and the stains on the mop can be cleaned with detergent. Therefore, when washing the mop, you can put it directly under the faucet, then put the detergent into the bucket to soak and wring it out, and the effect is better.
4. Clean up before mopping the floor
Deal with the hair and dust first, and try to drag along the lines of the floor, so as to remove the dirt on the floor and achieve a clean effect.
5, baking soda+vinegar mop the floor
Mix 30ML vinegar, 20g baking soda and 1L water evenly, then add a small amount of detergent and scrub the floor with the mixed solution, which can not only easily remove dust, but also effectively remove oil stains.
6, clothing softener mopping the floor
Pour a small amount of clothes softener into the water that sweeps the floor, which can reduce the friction of mop fibers and prevent static electricity. Moreover, some active ingredients added in the softener can form a protective film on the floor, so that the floor is not easy to accumulate dust, and it can be kept clean and tidy for a week as long as it is dragged once.
Introduction to the correct method of mopping the floor 3 Do you have to disinfect the floor with 84 every day at home?
No need.
Ordinary families don't need to disinfect with 84 disinfectant every day, just do personal hygiene protection. Because 84 disinfectant can't be directly used on people, it is usually sprayed in the air, and the family area is small, resulting in a high concentration of 84 disinfectant in the air, so it is generally not recommended to use 84 disinfectant at home.
The source of the virus at home is usually people who come into contact with outside, so you just need to pay attention to personal hygiene. If there are no people with infectious diseases such as hepatitis and tuberculosis at home, there is no need to disinfect with 84 disinfectant.
Under what circumstances do you need to mop the floor with 84 disinfectant?
If there are diseases such as hepatitis B and tuberculosis at home or patients with infectious diseases such as hepatitis B and tuberculosis at home, they can be disinfected with 84 disinfectant. Pay attention to the dilution concentration during disinfection, and don't mix it with toilet cleaner and washing powder, otherwise it will easily produce chlorine and cause chlorine poisoning.
In addition, 84 disinfectant has certain corrosiveness. If it is a wooden floor, it is recommended not to mop the floor with 84 disinfectant thinner.
What is the ratio of disinfection solution to water?
The ratio of disinfectant to water should be at least 1: 200, or diluted with more water.
Disinfectant is a colorless or yellowish liquid with a strong pungent smell, which must be diluted before use, otherwise it will cause irritation to people and respiratory discomfort.
Generally speaking, it is better to dilute the floor with 200 times of water, that is to say, if you use 10mL of 84 disinfectant, you should add 2000mL of water to dilute it, and then disinfect the floor with the diluted 84 disinfectant.
Correct method of mopping the floor with 84 disinfectant
1, wear rubber gloves and masks, then open the window for ventilation, dilute 84 disinfectant in the bucket, and then put the dry mop in the bucket.
2, wring out the mop, it is advisable not to drop water under natural conditions.
3. Carefully drag it to the place where disinfection is needed. At this time, family members can go out temporarily. The longer the better, at least about 5 hours.
4. Clean the mop after the smell of 84 disinfectant at home dissipates. It is best that there is no residual smell of 84 disinfectant on the mop at last.