1. According to Qijia experts. When carpenters make furniture, they often need to cut the wood at 45 degrees. You can nail two pieces of wood on the stool to fix the wood to be cut, then mark the cutting line on the wood at a 45-degree angle with a protractor, and finally cut along the cutting line with a saw. Or, after marking the cutting line with a 45-degree angle on the wood, cut it with a diagonal cutter.
2. When customizing furniture, in addition to cutting wood into 45-degree angle splicing, there are many splicing methods, such as concave-convex splicing, cutting splicing, 90-degree splicing, mortise splicing and hidden screw splicing. Among them, 45-degree angle stitching and 90-degree stitching are relatively simple and efficient; They are usually bonded with glue. In the process of bonding, the bonding surfaces of wood must be aligned to avoid uneven panels.
3. In recent years, more and more families will ask carpenters to customize furniture; Compared with finished furniture, carpentry can be customized according to the structure of indoor space, which can make full use of indoor space; Moreover, when we customize furniture, the designer will customize it according to the needs of the owners, and the function and style of furniture are more in line with the requirements of consumers; However, custom-made furniture is more expensive and the production cycle is longer.
Bian Xiao concluded: What is the 45-degree corner cutting skill of carpentry? Here Bian Xiao will give you a brief introduction. I hope that after reading this article, everyone can understand this. When carpenters deal with corner lines, we need to pay attention to the fact that the gap of splicing should not exceed 0.2-0.3 mm If the gap of wood splicing is relatively large, we can ask carpenters to rework it.