Question 1: How to tie shoelaces quickly? The bow-tie method is the fastest and only takes a few seconds!
Method:
1. Thread the shoelace head straight from the bottom (gray part) from top to bottom into the two shoe holes at the bottom.
2. Thread the shoelaces from the inside up (the dotted line part) to the next row of shoe holes, leaving a "gap".
3. Cross the shoelace heads and insert them into the next row of shoe holes.
4. Continue to go up, pass straight on the inside, and cross over on the top.
Comments: The remaining laces are longer and comfortable and the "upper area" is loose.
Notes: In addition to leaving a gap in each even number row, it can also be tied according to the shoes. Choose the lace position according to the tight part, which can give the feet more "breathing space."
Question 2: How to tie shoelaces quickly, it is super simple, so you need to use video teaching!!
p>
Question 3: How to tie shoelaces quickly. Illustration of how to tie shoelaces. Illustrations of how to tie long shoelaces are as follows:
1. Cross knot
1. One end Tie a knot on the inside and pierce the other end in sequence;
2. Jump through a hole and pierce it;
3. Tie it in the same way;
4 , after repeated, the remaining shoelaces are stuffed inside and knotted;
5. The purple shoelaces are also perforated in the same order in the same way;
6. Thread them from below Go in and wear it out from the top;
7. Choose harmonious shoelaces according to the color of the shoes;
8. Knot the excess shoelaces on the inside.
2. Trapezoidal knot
1. After adjusting the length of both ends of the shoelace, pull out the shoelace from the inside to the outside;
2. Pull out the shoelace from Pass the second hole from the outside to the inside;
3. Pass the shoelace on the left side from under the shoelace between the two holes on the right side, and do the same on the right side;
4. Repeat the operation;
5. Pay attention to the direction of the cross shoelaces at both ends;
6. Stuff the excess shoelaces into the shoes and tie them;
7. Completed Ladder knot.
3. Twist knot
1. After the two shoelaces are knotted inside, they are worn out;
2. After the two shoelaces are crossed, Pass through the second hole;
3. At this time, in order to center the intersection as much as possible, tighten the shoelaces;
4. The process of centering the intersection will produce a twist. ;
5. Enlarged picture of the twist knot;
6. Leave the last hole;
7. Finally use X-opening to process it, put it on and take off like this It is more convenient;
8. Put the remaining shoelaces inside the shoes and tie them together
4. Double X knot
1. Start from the second step. Start with the first hole and thread the shoelaces from outside to inside;
2. First tie the white shoelaces with the X knot method;
3. The white X knot shape;
4. Tuck the end inside and tie it with a knot;
5. As shown in the picture, pass the blue shoelace through the first hole, tie an X knot, and pass through the intersection of the white shoelace ;
6. Knot the end of the blue shoelace;
7. The remaining line is relatively long and can be made into a loop;
8. Go around a few times and then go through the ring.
5. Double Straight Knot
1. Leave a length of yellow shoelaces and pass them out from the left hole and into the right hole;
2. Follow the instructions Wear shoelaces in the direction of the dotted line;
3. Adjust the shoelaces so that they remain straight and do not roll up;
4. Stuff the excess into the shoes;
5. Also leave a section of white shoelace on the inside, and tie the yellow shoelace inside;
6. Wear the shoelace in the direction of the dotted line;
7. Adjust the white shoelaces so that they are on top of the yellow shoelaces;
8. Knot the excess part with the yellow shoelaces on the inside of the shoe.
6. Slant knot
1. After passing through the first hole, tie a single knot inside, and pass the other end through the third hole on the left from the inside to the outside;
2. Thread the shoelace through the second hole on the right;
3. Use blue shoelace to complete the diagonal knot look;
4. Use white shoes Tie the laces in the opposite direction with a diagonal knot;
5. The method is the same as the blue shoelaces;
6. The blue and white shoelaces finally pass through the hole in the tongue Come out;
7. The way it looks like it comes out from the tongue part;
8. It looks better if it is tied loosely.
7. Internal Pass the 1) hole into the (2) hole, and then through the (3) hole;
3. Repeat steps (1) (2) (3) (as shown in the picture);
4. The length of something needs to be 90-95CM, and the remaining length is as shown in the picture;
5. Knot it on the inside;
6. After completion style.
Question 4: How to tie shoelaces quickly. Here is the quick tying method
1. After putting on the shoes, tighten each section of the shoelaces, straighten and tighten both ends of the shoelaces< /p>
2. Hold the ends of the shoelaces tightly with your left and right hands, separate your thumbs and index fingers into a figure-eight shape, pass under the stretched shoelaces and tighten them.
3. Let the left and right The horoscopes of both hands are slightly crossed (let the index finger of the right hand be on the index finger of the left hand, and the corresponding thumb of the right hand is under the thumb of the right hand), so that the tight parts in the middle are touching
4. Then, the index finger of the right hand and the left hand Press down the tight shoelaces on the opposite side with your thumbs and bend them into a hook shape
5. Continue to extend the hooking action in the above steps. This is the first time, so you can pull it to the opposite side. to the shoelaces, thus making a slipknot
6. The first four steps of the second pass are the same as the first pass, except that in the fifth step, do not stretch out the shoelaces and control the shoelaces. The length of the strap ends can be tightened at the root~
Question 5: The simple way to tie shoelaces is to quickly and quickly tie the knot crosswise, then wind the two straps into a loop, and tie the two straps together. Cross-ring knotting
Question 6: A convenient, beautiful and quick way to tie shoelaces with a bow
Question 7: What is Nike's quick shoelaces and how to tie them? It’s not fastening, it’s fastening. You don’t need to pull it one by one, just pull it and it will be all tight down there. And it can effectively prevent the laces from not being tied tightly. AIR JORDAN 22 uses this principle, as does the NI E VC 4.
Question 8: How to tie shoelaces quickly and beautifully? Take the two ends of the shoelaces and thread them all over the eyes. Put both ends through the first shoe eyelet (the first row away from the toe surface) at the same time. The two ends of the shoelaces need to be pulled evenly and evenly, and then the two ends are crossed at the same time until the eyelets are full. First tie a cross knot, and then tie it into a knot. Bow tie or figure 8 shape.
Question 9: How to tie shoelaces quickly, in two or three seconds. Pictures are best. Bow tie method
Method:
1. Thread the shoelace head straight from the bottom (gray part) from top to bottom into the two shoe holes at the bottom.
2. Thread the shoelaces from the inside up (the dotted line part) to the next row of shoe holes, leaving a "gap".
3. Cross the shoelace head and insert it into the next row of shoe holes.
4. Continue to go up, pass straight on the inside, and cross on the top.
Comments: The remaining laces are longer and comfortable and the "upper area" is loose.
Notes: In addition to leaving a gap in each even number row, it can also be tied according to the shoes. Choose the position of the laces in tight areas (as shown in the picture), which can give the feet more "breathing space.