The blockboard size of the left and right door frame keels is 200cm× 3cm×8cm, and the blockboard size of the door frame top keels is 80cm×3cm×8cm. Glue the high-density nine-lining board to the keel and fix it with nails.
Put the door on the door cover, make good gestures, determine the specific position of the hinge on the door cover, and cut out the caliber according to the thickness of the hinge. And cut out the diameter of the lock sleeve. Install the door to the door cover and tighten the hinge with a screwdriver. Note that the gap between the door and the door cover shall not be greater than1.5mm, subject to the smooth opening and closing of the door.
Extended data:
Precautions:
1, pay attention to overload: the elevator cannot be overloaded. When the elevator gives an alarm, you should quit voluntarily and wait for the next ride. It is very dangerous to overload the elevator.
2. Don't block the elevator door: When the elevator door is about to close, don't rush into the elevator forcibly to prevent the elevator from closing, and don't have one foot inside and one foot outside, which will hurt you.
3. Don't just press panic button: panic button was set up to deal with emergencies. Never press panic button when the elevator is running normally, otherwise it will bring unnecessary trouble to users. ?
4. Operation without opening the door: When taking the elevator, if the elevator door is not closed, there is something wrong with the elevator. Passengers should not ride, and report to the maintenance personnel.
5. Don't take the elevator under maintenance: Before coming to the elevator, passengers should first check whether there is a stop sign. If the elevator is under maintenance, this sign should be hoisted and passengers are not allowed to ride.
Baidu encyclopedia-elevator door cover