1. As shown in the figure, the line turns counterclockwise, presses, picks, presses, and then goes down.
2. Then, pick up the thread and pass through the central area clockwise.
3. The wire goes out around the other side in a counterclockwise direction, and then goes out in a clockwise direction in the same way as in step 3.
4, clockwise winding for four times, counterclockwise winding for five times, tension finishing, burning glue, fixed into a figure-of-eight knot, the size can increase or decrease the winding times.
Introduction of eight-character knot
The well-known figure-of-eight knot, as the name implies, will be shaped like an "8" after knotting, which is mainly used for anti-slip. When the rope is thick, first cross the rope ends, bypass the main rope, and tighten the rope ends after passing through the rope loop; When the rope is thin, fold the rope end in half, turn the folded part twice, pass the rope end through the rope loop and then tighten it. Even if the two ends are pulled tightly, they can still be easily untied.
In Italy, people call the figure of eight a "royal knot" because the shape of the knot is exactly what the Italian royal emblem looks like. In addition, the figure-eight knot also symbolizes honest love and unchanging friendship. So some people call the figure-of-eight knot a lover's knot.
Slipping the figure-eight knot is to change the figure-eight knot into the shape of a slipknot, leave enough length at the end of the rope to tie the figure-eight knot, and then put the rope end through the ring and tighten it. You can easily untie this knot by pulling the end of the rope.