Complete works of traffic signs
Traffic signs and markings are an important part of traffic management. It has played a positive role in road traffic safety and smooth and orderly roads. The following are several signs of traffic signs in China: warning signs, prohibition signs and indication signs. Let's take a look at the specific meanings of various icons. Turning left, right, straight and left means that only all vehicles are allowed to go straight. This sign is set at an appropriate position in front of the through intersection. It means that all vehicles are only allowed to turn left. This sign is set at an appropriate position where vehicles must turn left before the intersection. It means all vehicles are only allowed to turn right. This sign is set at an appropriate position where vehicles must turn right before the intersection. It means that only all vehicles are allowed to go straight and turn left. This sign is set at an appropriate position in front of the intersection. The vehicle must go straight and then turn left. Turn right and go straight, turn left and turn right, turn right and turn left, which means only all vehicles are allowed to go straight and turn right. This sign is set at an appropriate position in front of the intersection. The vehicle must go straight and turn right. It means that only all vehicles are allowed to turn left and right. This sign is set at an appropriate position where vehicles must turn left and right before the intersection. This means that all vehicles are only allowed to drive on the right road. This sign is located in an appropriate position in front of the intersection, and vehicles must drive on the right. This means that all vehicles are only allowed to drive on the left side of the road. This sign is on the right before the intersection. Vehicles must drive on the left. Turn left at the straight intersection, turn right at the straight intersection and drive around the island. Walking means that vehicles can go straight at the intersection and turn left according to the route shown in the figure. This sign is located on the right side of the left-turn exit of the overpass. It means that the vehicle can go straight at the intersection and turn right according to the route shown in the figure. This sign is located at the right-turn exit of the overpass. It means that only vehicles are allowed to turn around on the right. This sign is located in a proper position around the island, facing the traffic direction of the intersection. This street can only be walked. This sign is located at both ends of the pedestrian street. The minimum speed limit of honking means that the motor vehicle must honk its horn according to the sign. This sign is located at the starting point of sections with poor visibility such as sharp bends and steep slopes. Indicates the minimum speed limit for motor vehicles to enter the road ahead. This sign is located at the starting point of the speed limit section of the expressway or other roads. This means that all vehicles are driving left or right in one direction. This sign is located at the proper position of one-way intersection and entrance. This means that all vehicles are driving in one direction. This sign is located at the proper position of one-way intersection and entrance. The main road goes first, the intersection goes first, and the crosswalk turns right. The lane is the main road. This sign is set at an appropriate position in front of the driveway. This sign is set at an appropriate position in front of the driveway. It means pedestrians crossing the road. This sign is located on both sides of the crosswalk. Indicates the driving direction of the lane. This sign is set at an appropriate position in front of the guide lane. The straight lane, straight lane, shunt lane and special lane of the bus line indicate the driving direction of the lane. This sign is set at an appropriate position in front of the guide lane. Indicates the driving direction of the lane. This sign is set at an appropriate position in front of the guide lane. Indicates the driving direction of the lane. This sign is set at an appropriate position in front of the guide lane. This means that this lane is reserved for buses driving on this line. This sign is set at the appropriate position before entering the starting point of the driveway and the entrance of each intersection. Driving motor vehicle lanes, non-motor vehicle lanes and non-motor vehicle lanes refer to vehicles driving in the lanes. This sign is located at the starting point of a road or driveway, in a proper position before the entrance to the intersection. Indicates that the road or lane is for motor vehicles only. This sign is located at the starting point of a road or driveway, in a proper position before the entrance to the intersection. Indicates non-motor vehicle driving. This sign is located at the starting point of a road or driveway, in a proper position before the entrance to the intersection. Indicates that the road or lane is for non-motor vehicles only. This sign is located at the starting point of a road or driveway, in a proper position before the entrance to the intersection. Allowing a turn is allowing a turn. This sign is located at the starting point of the section where motor vehicles are allowed to turn around, and at an appropriate position in front of the intersection.
Recognition strategy of traffic signs
Identification of traffic signs
Steps/methods
1. Traffic signs on roads should pay attention to yellow forbidden markings and guide arrows. Traffic signs on the road are the most easily overlooked, because many drivers are used to looking forward and sideways.
2. The solution is to make the line of sight stereoscopic and keep the line of sight far away. For the yellow forbidden bid, it is usually easy to find because of the color.
It should be noted that the double yellow line cannot cross the line, and the yellow dotted line can cross the line according to different machines, while the yellow dotted line and the yellow solid line can cross the line on the side of the yellow dotted line. White guide arrows are easily overlooked. In order to find the guide arrow in time, the driver needs to slow down when driving about 500 m in front of the intersection. By observing whether there is a guide sign above the intersection and whether there is a corresponding guide arrow on the road ahead, it is easier to identify.
3. Observe the traffic signs above the road and on the road.
It should be noted that not all turn arrows are arranged according to the customary orientation. Some turn right arrows are in the innermost lane, and some turn around arrows are in the rightmost lane, so it is necessary to identify them with the traffic signs above the road in time. 4. Identification of traffic signs on the road
Traffic signs on roads are usually set on bridges and beams, which are more common near highways and intersections, and are often used to indicate directions and lanes. So before driving to the intersection, be sure to pay attention to these signs above the front view and follow the instructions to drive into your driveway. Many signs on the expressway are the names of the places ahead where the expressway drivers will arrive, and indicate the current distance and which exit to leave from. According to these instructions, pay attention to the exit information of the destination.
There are also speed limit standards for each lane. For example, the speed limit of the innermost lane is usually 120km/h, the speed limit of the middle lane is 100km/h, and the speed limit of the outermost lane is 80km/h. Drivers should drive according to regulations.
5. Traffic signs above the road
Complete collection of traffic signs @20 19