First, the connection between the fishing line and the fishing rod In fact, the main requirements for the connection between the fishing line and the fishing rod are as follows: the rope of the fishing rod should not be too long, and it should be one to two centimeters after it is finished; The connection between the main line and the pole rope should be firm and cannot be easily loosened; Try not to hurt the main line during the connection, so as not to break the line and run the fish when the fishing rod is stressed; During use, the rod rope should not be entangled with the main line, so as not to affect the normal fishing; The main line is easy to connect and disassemble, and it will not be too complicated.
Second, the fishing line and the pole are slightly knotted: first, make a ring buckle at the top of the main line, and the circumference of the ring buckle should be controlled at about 10cm, and tie it with a figure-of-eight knot; Select a spatial bean greater than or equal to twice the diameter of the main line. It is more suitable to choose round beans for space beans. Put the ring buckles together and cover them outside. Then tie a splayed knot at the top of the ring buckle to form a small ring buckle. The small ring buckle is as small as it can be, and the size is subject to being pinched by hand.
Tie a common knot on the pole rope, and of course you can also tie a figure-eight knot. The shorter the knot, the better. The longer the knot, the easier it is to increase the probability of winding. Pull the space bean to the bottom of the big ring buckle, wrap the big ring buckle into a horseshoe buckle, put on the red rope, tighten it, and then push the space bean up to lock the buckle. When the main line needs to be unloaded, loosen the space bean first, and then gently pull up the small ring buckle, and the horseshoe buckle will automatically loosen, thus unloading the main line.
3. Precautions when the fishing line is slightly connected with the rod: In order to avoid damaging the main line when installing the space bean, it is suggested to coat some lubricating oil on the main line in advance to facilitate the space bean to cross the line smoothly, which can greatly reduce the damage to the fishing line; In order to reduce the winding probability between the pole rope and the main line, it is suggested that the micro-junction joint of the pole should be burned with a lighter on the basis of shortening the length of the micro-junction pole rope.