1, faucet installation preparation
Before installing the faucet, check whether all the parts of the faucet are complete. Common faucet pump accessories include hoses, rubber washers, shower heads, decorative caps and crutches. Before installing the faucet, close the main tap water valve, clean the water pipe, drain water to clean the sediment impurities in the pipe and the impurities in the installation hole. , and insist on whether the accessories in the box are mixed with impurities to avoid blocking the valve core during installation.
2, faucet installation process steps
When taking over, remember that there is a hot water pipe on the left and a cold water pipe on the right, and the distance between them is 100-200mm. Remove the faucet after the water inlet pipe joint is fixed, and then install the faucet after the wall plastering is completed, so as to avoid the surface coating from being worn. Turn the old faucet counterclockwise with a 250-30mm adjustable wrench or pipe wrench, hold the faucet with your left hand, and wind the faucet clockwise on the thread of the faucet, screw the faucet clockwise on the joint of the tap water pipe, tighten it with a wrench, and then open the main tap water valve.
3. Installation of other faucets
After we know how to install the general water dragon gate, then other faucets are not a problem. All we have to do is talk about the installation of shower faucet and bathtub faucet. If it is a wall-mounted faucet, you need to choose a suitable height to bury the outlet pipe, and the distance between the hot and cold water pipes is about 20 cm or more. If it is a concealed faucet, the valve core of the faucet should be embedded in the wall. Pay attention to the thickness of the wall when embedding, and don't remove the plastic protective film of the valve core when embedding, so as to avoid cement damage to the valve core when embedding. In addition, pay attention to the up, down, left and right direction of the control valve core to avoid burying it wrong.
The installation of the faucet is almost like this. Everyone must be careful during the installation process. If the installation is not good, it will affect our life and we cannot get water. Therefore, it is very important to install the faucet.