Adjustment purpose:?
Because there is a slight deviation between the position of the cutting head at 0 degrees and when rotated to 180 degrees, when cutting glass using the reciprocating cutting method, from left to The right cutting line and the cutting line from right to left do not coincide. In order to make the left-to-right cutting line coincide with the right-to-left cutting line, appropriate motion compensation must be added during cutting. The rotary knife difference setting is to adjust the compensation distance between the left-to-right cutting line and the right-to-left cutting line. ?
Adjustment steps:?
1. First, adjust the cutting line from left to right to coincide with the camera crosshair. ?
2. Click "" or "" to enter the "" interface, which is as follows: ?
3. Suction the glass on the workbench ,Adjust the camera display area. In the trial cutting area of ??this interface, set the glass surface height, feed depth, feed pressure, trial cutting starting point, and trial cutting end point. ?
4. Steps for setting the rotary knife difference:?
A. Make a trial cut on the glass from left to right. At this time, the cutting line should coincide with the camera's cross line. Otherwise, start over from item 1?
. ?
B. Click the "" button. ?
C. Do not move the workbench at this time, and then make a test cut on the glass from right to left. ?
D. Use "" to move the workbench in the Y direction so that the cutting line coincides with the camera's ?
crosshair. Note: The slide of the lens holder cannot be adjusted. ?
E. Click "". ?
F. Click "", and the data next to the button will change. This value is the motion correction value, in units of ?
mm. ?
5. Test:?
Select the "round-trip cutting" method in the automatic operation interface, and try cutting a piece of glass to see if the position of the cutting line meets the requirements. If satisfied, the setting process ends. Otherwise, reset. ?
Join VIP and download this article for free
Save this article for free now
Exclusive access to millions of high-quality documents for free
One-click VIP search Free documents
Free reading of high-quality books
Share
Collection
Download
Open the Wenku App to view updates More similar documents?
2018 new model (Sagitar) promotion, the lowest price in the country, only in September, one-click inquiry!
Aika Auto? Advertisement
Related recommended documents
10 common problems and solutions when using laser die cutting machines
Use View with App
Automatic switching device for leather bowl cutting machine knife
View with App
Some characteristics of laser cutting machine compared with die cutting
Design of radioactive gamma knife cutting machine
Application of automatic switching knife device on leather bowl cutting machine
Multi-knife glass cutting machine (LHC-Q420-V1 )
Application introduction of vibrating knife cutting machine
Cutter upper shaping machine and cutting machine JHA
Special cutting oil for glass multi-knife cutting machine
Special cutting oil for multi-blade glass cutting machines
View
Baidu Library
Xiong Zhanghao
Baidu Library high-quality content Featured
Baidu Search
How much does the profit of mutton soup cost for a donkey...
How much does it cost to join a venison restaurant in a one-acre greenhouse
Reasons for poor memory for naming donkey meat restaurants
Volkswagen’s new SUV Laos Siamese rosewood furniture
Our advantage is not only the price, the Yasi Ouwei solar film is of good quality, and the car owners have always choose!
Chengda Auto Supplies? Advertisement
Download the original document for easy reading at any time
Download the document