If the fan of the range hood at home is an internal-shaped small-blade fan, such a fan is effective at shooting oil smoke, but it is also more likely to be contaminated with oil. In addition, because the fan is internal, that is to say The fan is installed at the innermost part of the range hood, so it is really laborious to clean it yourself. The oil stains on the range hood fan were not scrubbed clean using common methods.
Let’s take a look at our tips: When using this tip, turn on the hair dryer to the maximum, then extend the hair dryer into the inside of the range hood and blow air next to the fan. Pay attention when blowing. Blow horizontally first, then vertically. This is done so that any part of the fan can be heated evenly.
Generally, this process takes half an hour. When the time is up, still use a brush dipped in a small amount of water to scrub the fan of the range hood. After brushing, let's take a look. There is really a lot of oil on the brush. This should wipe off all the oil on the fan!
Next, we use a clean wet rag to scrub the exhaust fan again. The purpose of this is to remove the remaining oil stains on the range hood fan. After wiping, let’s take a look at the oil stains on the rag. There is almost no oil stains! Let’s compare it with the previous situation! The oil stain on the range hood fan was finally wiped clean!
There is also a lot of oil stains on the fan cover. We also turned on the hair dryer to maximum power and blew it close to the fan cover. Blow horizontally first, then vertically. After blowing one side, we use the same method to blow the other side, and it’s done! Now we put the fan cover in water with detergent and wash it with a rag or brush. See if the oil stains are not washed away. Let’s see the result. It’s really clean, with no oil stains at all! The trick worked!
3. Tips for removing oil stains from the range hood oil box
First of all, let’s prepare the tools for cleaning the oil box: clean brushes, clean towels, and ordinary detergents.
Let's boil some boiling water first. Boiling water can be of great use when cleaning the oil box. While boiling water, we stuff a clean towel into the oil box. When stuffing, be careful to plug the corners of the oil box tightly without leaving any gaps.
Now that the water is boiled, we pour the water into the basin and then add an appropriate amount of detergent. The amount can be controlled according to the degree of dirtiness of your oil tank. After that, you can put the oil box stuffed with a towel in boiling water. The oil box should be soaked in water for 30 minutes.
Why do you have to use boiling water, because boiling water can soften the oil that has solidified on the oil box;
Why should you plug the oil box with a towel? The softened oil can be directly removed. The towel absorbs, thus preventing oil stains from spreading in the water.
The soaking time is up and the water is cold. We first take out the towel from the oil box. The oil stain on the oil box dyes the towel yellow. Looking at the condition of the oil tank again, the oil pollution has been reduced! Now let's clean the oil tank thoroughly. Change a basin of clean water, add an appropriate amount of detergent, and clean with the prepared brush. At this time, the oil stain has been softened by soaking in boiling water and can be easily washed off. What's the result? Very clean!