At what stage of decoration should you consider customizing wooden doors? Which 4 key steps are worth learning?
The wrong door, the wrong household, a distinguished family, a scholarly family, a door full of guests... "door" occurs in four-character idioms and common sayings. The most common thing is furniture. It is not difficult to see that whether it is an entry door or an indoor wooden door, it is very important for a home. So, at what stage of decoration should we consider customizing the whole house? Integrating the whole process of interior decoration, Kangjia and others will talk to you about the four key nodes and common problems in customizing the whole house. It’s full of useful information, you can click on the collection in the upper right corner first, and then go back and study it slowly~
No.1
The four key nodes of customizing the whole house
01. When designing, determine the design style and color. When designing, you can go to large shopping malls for home decoration and building materials and look at the scene layout of each category and well-known brand, such as kitchen cabinets, solid wood doors, and furniture customization. , wooden floors, floor tiles, booth sofas, etc. Interior decoration is to bring together this kind of furniture and raw materials. Therefore, every piece placed in the home category, from the design style to the color matching, from the material selection to the pattern line frame, must look comfortable and eye-friendly. A sense of dissonance. Based on the overall design of the whole house, clarify with the designer the actual number of rooms in the whole house, as well as the actual number of matching wooden doors, combine the decoration style of the whole house, the color of the floor roof and the decorative materials, and clarify the actual number of wooden doors. Features, Colors.
02. After the renovation, accurately measure and submit the order.
After the renovation and creation of the wall according to the plan design, it must be based on the total number of door openings in the entire house and the size of each room. Actually open the door position and measure it one by one. The specifications of the door opening are measured accurately. At this time, you need to contact the salesperson of the brand store and submit the order. The replenishment cycle of solid wood doors (including door frames and decorative design packages for the window openings) generally takes 45 days.
For the accurate measurement of door openings, pay attention to the following three points:
① Take the minimum value for the height and width of the door opening
When measuring the door opening specifications, The height is divided into three information: left, middle, and right. The width is divided into three information: upper, middle, and bottom. Check whether the three specifications of height and spacing are consistent. If the three specifications are different, the minimum value among the three shall be used.
Measurement of the door opening▲
②The thickness of the door opening, take the maximum value
The door openings of the house must use wooden door covers for WPE packaging, so You also need to measure the thickness of the door opening. Everyone needs to pay attention here. The thickness of the door opening is divided into three measurements: upper, middle and lower. The specifications are inconsistent, so take the maximum value! Take the maximum value! Take the maximum value! (Be sure to say important things 3 times!)
③Use mixed mortar to level the surface of the door opening
If the quality of the house is not very good, the height and width of the door opening will vary greatly. , you need to use mixed mortar first to level the surface of the door opening. pay attention to! If the height deviation of the door opening exceeds 20mm and the thickness deviation exceeds 5mm, the ground needs to be leveled first!
03. In the carpentry process, make door frames and cover openings
In the carpentry process of interior decoration, there are also window openings for various rooms, living balconies, and corridor door openings. , Carpenters have to carry out WPE packaging of door frames and window openings on the rough walls.