LZ never knew what Adobe audition was before. Adobe only knew PS and Flash. I once asked Touche how to make a material for a music festival. Touche, tell me what AA is. At that time, I went to Baidu and got on Adobe audition CS6 by mistake. Then I went to Baidu. There are basically no tutorials (in fact, it should be said that LZ is too stupid to understand those tutorials), so LZ pondered it himself. Although I know only a little about AA, it is enough for music programs. So what LZ teaches you here is only the method LZ has come up with, which is not the best, but it is still effective. Please forgive the strange screenshots in some places. I hope LZ can also inspire more technical skills in writing tutorials (* _ _ *) ~
Adobe audition download address
/p/2974789043 (This post also has an installation tutorial)
LZ uses Adobe audition CS6 here.
After talking nonsense, let's start talking about how to make the material ~
1, open Adobe audition.
Interface of Adobe audition cs6
2. Select "File"-Select "Open" to open the file, and the original audio and video will be converted into audio and the background music we need.
Here, the original video file name of LZ is "Brother Tells Stories (Master) .mp4"
The file name of the original video converted into audio is "Brothers Telling Stories (Late at Night) .mp3"
The file name of the background music needed to synthesize the material is "P 1 13.mp3".
We will use the last two audio files.
Find the file we need and open it.
After opening these two files, the interface will look like this.
At present, the selected file is "Brother Telling Stories (Late at Night) .mp3", and it can be seen that the file name is relatively large and the color is yellow.
Package reply
Report | 2014-09-3019:16 on the 2nd floor
nancyhaibara:? Ask ~ ~ ~ what background music is needed for the third synthetic material? I want to eliminate human voices in the video conversation, but the background of this conversation is only the noise of the street. Can you do it your way?
20 14- 10-8? 17:25 reply
Bean egg cat:? Reply nancyhaibara: The third file is the audio file converted from the original video, and the sound is the same as the original video, so we need to remove the human voice. The background music is p 1 13. If the material you want to make has no background sound but is very noisy, stick the noise on the human voice, and the method is similar to this.
20 14- 10-8? 17:32 reply
Bean egg cat:? Reply nancyhaibara: Yes, copy and paste = =
20 14- 10-8? 17:33 reply
nancyhaibara:? Reply to the bean egg cat: OK ~3Q pro!
20 14- 10-8? Reply at 20:36
Bean egg cat:? Reply nancyhaibara: You're welcome ~
20 14- 10-8? 2 1:05 reply
I also said.
There is a reply from 13, click to view.
Bean egg cat
A famous party
1 1
3. Find out the parts that need to be silenced.
First, click Play, and the red line will move to tell you the current playing position. Under the waveform file, it tells you where the current red line is.
At this time, the part that needs to be silenced appears. Click on the symbol that looks like a shield in the lower left corner and add a label. There will be one more "mark 0 1" in the waveform file and the bottom left border.
Double-click "tag 0 1" in the lower left corner to change the name of this tag, so I'm too lazy to demonstrate here = =
What we want to be silent is not a point, but a part. At this time, you can mark the waveform file with "0 1" and right-click and select "Convert to Range".
At this time, it becomes a range.
Mark has become like this here.
Make the range marked "0 1" contain the parts that need to be silenced, and pay attention to check that it does not contain the parts that do not need to be silenced.
According to the above method, find out all the places that need to be silenced.
(This is special, please ignore "07")
Tips: The name, start time, end time and duration of the label can be changed by double-clicking directly, or copied and pasted.
answer
Report | 20 14-09-30 19:22 on the third floor
Bean egg cat
A famous party
1 1
This is the most troublesome one. Find a suitable part from the background music to replace the marked part.
Change the interface to "P 1 13.mp3".
Find the first matching fragment in the same way as above.
Then go back to "Brother Tells Stories (Late at Night) .mp3" and copy the "Duration" marked with 0 1 to the "Duration" marked with 0 13.mp3 (here, only the shortcut keys ctrl+c and ctrl can be used. Because it is necessary to ensure that the two segments are the same length.
Copy the fragment of "P 1 13.mp3" marked with 0 1 to "Brother Storyteller (Late at Night) .mp3" marked with 0 1.
① in "P 1 13.mp3", move the mouse to the waveform file "marker 0 1", the mouse cursor will change to a hand shape, and then double-click to select "marker 0 1".
② Right-click to select Copy (of course, you can also use shortcut keys).
③ Go back to "Brother Tells Stories (Late at Night) .mp3", select "Mark 0 1" and paste what you just copied.
(4) then listen to the audition. Generally speaking, it doesn't fit perfectly at one time, so it is necessary to adjust the range of "mark 0 11"of "p/0/3.mp3m3", and then copy and paste it into "mark 0 1" of "storytelling brothers (late at night)". MP3 "until you feel it.
LZ finally completed the first denoising part. It can be seen that the starting range of "P 1 13.mp3" is quite different from before, but the length is the same.
Generally speaking, the music of the whole material is coherent background music, so as long as we find the first mark correctly, the rest can be solved mathematically (unfortunately, the last part of LZ in this example is looking for QAQ again).
Here I randomly selected a marker 02 of "P 1 13.mp3".
⑥ Calculate the time difference between "Mark 02" and "Mark 0 1" in Brothers Telling Stories (Late at Night). Mp3 ",and the time difference between" Mark 02 "and" Mark 0 1 "in" P 13 ". MP3 "is the same as the former, so it is the same.
This is the correct time for "P 1 13.mp3" and "Mark 02" after calculation.
Mathematical methods are sometimes inaccurate (mainly because people's hearing is limited, especially LZ's hearing QAQ), so they may need to be adjusted.
Package reply
Report | 20 14-09-30 19:30 on the fourth floor
Bean egg cat
A famous party
1 1
5. After the replacement, you can save all the marks, but generally speaking, the background volume of the material is a bit loud and needs to be turned down.
Check "Mark 0 1" and select "Effect", "Amplitude and Pressure Limit" and "Increase".
Here we adjust it like this, and then complete the adjustment of other marks in turn.
In fact, just open "P 1 13.mp3" in this step, and you don't need to change the labels one by one, but LZ is obsessive-compulsive, and it will be very uncomfortable when the volume is inconsistent when synthesizing. ...
6, be sure to remember to save after completion.
Select a file and save (or save as).
I'm too lazy to take screenshots here = =