How to look at the feng shui of a factory (1) Site selection and orientation: If the factory is located on a mountain, it will have support, and if it faces the stars, it will have energy. It is a prosperous mountain and a prosperous place, so that the factory can have a prosperous population and financial resources. Guangjin. That is to say, there is high ground behind the factory, or there are buildings, and there is water (river, road, etc.) in the direction of the factory gate. It is relatively open, low and flat, or it is a parking lot, park, square, etc., which is a wide open hall and a flood of money. (2) The internal layout of the factory is reasonable: 1: The office building is placed in the most prosperous or prosperous position of the entire factory (Qiu\Yannian\Tianyi) 2: The layout of the office is more particular, and the boss’s office should be in the prosperous position. It should be big. The offices of the vice president and the chief officer should be divided into two sides. It should be slightly smaller, with assistants on the left and assistants on the right. The finance room should be in the financial position of the office, and the window should preferably be able to receive foreign money. The offices of secretaries and technicians should be in the Wenchang position, the security personnel should be in the killing position, and other conference rooms, reception rooms, etc. should also be careful. 3: The door of the production workshop should be opened in a prosperous position, and the important machinery in the room should be in a prosperous position, which is an auspicious position for heavenly medicine. The workshop office must be located in the workshop. 4: The employee dormitories should be lower than the factory building, and the layout of living facilities such as canteens should also be reasonable. The bathroom and other facilities must be placed in the most dangerous and evil positions of the factory to suppress the evil positions, so as to ensure safety, good economic benefits, and fewer accidents in the factory. 5: Factory greening, fortune fountains, rockeries, road distribution, etc. must all pay attention to Feng Shui layout.
What Feng Shui taboos need to be paid attention to when opening a factory? 1. The overall layout is a very important principle if you open a company factory. I remember that during the 2008 financial crisis, many companies chose the wrong position, leading to their eventual collapse. In real life, some people build their companies next to the highway, and some companies build their factories in the center of the community. Some people build company factories in special factory areas. Some people built factories in the mountains. In the feng shui of several factories I have looked at, I have found a problem, that is, the performance of most of the factories near the highway is not very good. This is because the boss of the company does not understand Feng Shui, and there are many evil shapes beside the highway. Furthermore, the feng shui of a factory next to a highway requires more attention to the feng shui taboos than the feng shui of other locations. Therefore, it is recommended that if you open a factory, you must pay attention to the surrounding shape and environment. 2. Factory gate The factory gate is an important core point of factory feng shui. It symbolizes the company's wealth and popularity. If you open a factory, you must have an elegant door. Some small factories may not have doors, but did you know? This means that you have no popularity, lack of partners in business, and therefore no financial luck. If your door is opened in a bad position, or there are other problems, such as obsolescence, etc. That means there seems to be a lack of business partners, and it is easy to recruit villains to plot against you. 3. Office area (office building) The factory is divided into office area, construction area, dormitory area and canteen area. Generally speaking, the office area should not be too far away from the construction area, but it should not be close. Being too far apart is not conducive to the unity and cooperation of various departments, resulting in poor tacit understanding among employees. The work area should be separated from the dormitory area and canteen area. Work and daily routines cannot be merged together. If they are too close, employees may not be able to concentrate on their work. Fish tanks are not allowed in the office area. In Feng Shui, there is a meaning of turning water into wealth. If the fish tank has good Feng Shui, it will be auspicious. If the feng shui is not good, it will be bad luck. From a practical point of view, it also takes up space, so it is not recommended to place a fish tank in the office area. According to common sense, the front desk reception area must have someone to receive VIPs. As a symbol of welcoming guests, it is best to face the door of the office building. Don't block the door to your boss's desk to hinder your wealth. In the boss's office area, the desk should be against the wall, and the office chair should not have its back to the door. When necessary, you can hang some decorations with special meanings. This can increase popularity. 4. The factory equipment in the construction area (factory building) must be tidy. The arrangement should be balanced. A warehouse is a warehouse and a construction area is a construction area. It's too messy, and it gives the visiting VIPs the impression that your factory has lax rules and regulations, strict management, etc. In other words, if the first impression is not very good, you may lose an opportunity for cooperation and lose your fortune. In a regular factory, each equipment processing area will be stipulated, and the equipment will be arranged neatly. The manufactured products should be placed in the warehouse rather than in the construction area.
Factory Feng Shui Try not to use glass to reflect light, as it is easy to cause reflection.
The overall factory building is oriented from west to east, with the north on the left. It is difficult to build a bathroom in the left Qinglong position.
What should you pay attention to when planning a factory’s Feng Shui? The Feng Shui of a factory is slightly different from the general Feng Shui of a home. For the facade beautification and Feng Shui layout of a factory, follow the shifting method, reduction method, The method of increasing is to improve the appearance, facade, pattern, color, etc. of the building to achieve the effect of promoting wealth. Or you can use mascots and evil-controlling objects to replenish, regenerate, and transform the qi, which can help to keep the house safe, seek good luck and avoid bad luck, and create a new atmosphere.
The factory is an important place for generating wealth. If you want to have prosperous wealth and good fortune, you must find an environmental Feng Shui treasure place that both prospers the owner and gathers Qi. From the perspective of Feng Shui, the color of the interior of the factory should be combined with the five elements of the factory owner, the seating orientation of the factory, and the five elements of the products produced. When choosing the site for the factory, we should pay attention to the openness of the factory and accept the vitality from all directions, which is consistent with the emphasis on welcoming visitors from all directions in business. According to this principle, when choosing the address of the factory, you should also consider the openness directly in front of the factory. It is required that there should be no obstructions, such as walls, telephone poles, billboards, and overly large trees. Pay attention to the openness in front of the factory door, so that the factory can face all directions, which not only broadens the factory's field of vision, but also allows customers in the distance to see the factory, so that the product information operated by the factory can be disseminated. Feng Shui calls this transmission of information the flow of Qi. With the flow of Qi, there is vitality! From a business perspective, customers and pedestrians may come to place orders after receiving the product information from the factory. So,? Let’s talk about things to pay attention to when planning Feng Shui in a factory.
1. The key to factory building Feng Shui lies in the following aspects:
1. Site selection and orientation: The factory building sits on a mountain for support, facing the stars for support, and has energy for it. Only when the mountains are prosperous can the factories be prosperous and the people can be prosperous, and the wealth can be abundant. That is to say, there is high ground behind the factory, or there are buildings. There is water (river, road, etc.) in the direction of the factory gate. It is relatively open, low and flat, or it is a parking lot, park, square, etc. It is a bright hall and a good way to make money. When choosing a factory location, the first choice is to consider the affordability of the factory rent and the convenience of transportation, but don’t forget that the key Feng Shui pattern will determine the prosperity of your production and sales. Without a reasonable factory Feng Shui pattern, it will be difficult to continue to prosper in the long term. The feng shui of factory decoration must be combined with the numerology of the main shareholders to determine the overall feng shui pattern. It mainly surveys the feng shui lines and patterns of the gate, front desk, general manager's office, financial office and marketing department to ensure smooth operation of the factory. If the main details of factory operation are well grasped, management can be smooth. However, if management is smooth, research, production and sales will still be difficult to achieve as expected. At this time, it is recommended to adjust the factory's Feng Shui. Master Liu Yirong has been professionally surveying Feng Shui for 30 years. Seiko's factory site selection survey, decoration Feng Shui and Feng Shui layout guidance will help you broaden your horizons and seize the geographical advantages to develop and expand your business!
2. The internal layout of the factory is reasonable: the office building should be in the most prosperous or prosperous position of the entire factory (Qi\Yannian\Tianyi). The layout of the office should be more particular. The boss's office should be in a prosperous position and should be large. The offices of the vice president and chief officer should be divided into two sides, which should be slightly smaller. The financial office should be in the financial position of the office. It is best to have a window. Accept foreign money. The offices of secretaries and technicians should be in the Wenchang position, the security personnel should be in the killing position, and other conference rooms, reception rooms, etc. should also be careful.
3. The door of the production workshop should be opened in a prosperous position, and the important machinery in the room should be in a prosperous position, which is an auspicious position. The workshop office must be located in the workshop.
4. The employee dormitories should be lower than the factory building, and the layout of living facilities such as canteens should also be reasonable. Bathrooms and other facilities must be placed in the most dangerous and evil positions of the factory building to suppress the evil positions, so as to ensure safety, good economic benefits, and fewer accidents in the factory building.
5. The greening of factory buildings, fortune fountains, rockeries, road distribution, etc. must pay attention to Feng Shui layout.
6. Whether the location is good: good buildings, whether the nearby buildings on the left and right are coordinated or digested, and the location must be good and the transportation must be convenient.
7. The appearance of the building is elegant: the facade is sleek and elegant, the color of the tiles on the outer wall is appropriate, the glass is bright, and the building has a noble and generous style.
8. Spiritual Wall: The name of the building should be elegant and wealthy, and the logo or name of the building should be kept fresh and bright. The entrance hall and spiritual wall should be three-dimensional and energetic.
9. Factory layout: The partitions should be of appropriate size and the access lines should be smooth. The lighting should be sufficient. In addition to fluorescent lamps, light bulbs should be used in corners to allow airflow throughout the room.
10. Basement: Generally, the basement is more suitable for warehouses, factories, restaurants, and is not suitable for the chairman's office, general manager's office, stock company, etc.
11. Mascots to make evil objects : Mascots include ingots, God of Wealth, auspicious stones, vases, God of Peace and Wealth Talisman, etc. Evil objects such as Tai Chi diagrams, Bagua diagrams, stone lions, etc. A mascot is something that you can feel very friendly and blessed when you see it. You can put more mascots in the room, but you can only specialize in one or two of the evil-controlling ones.
12......>>
What issues should be paid attention to in Feng Shui planning for factories and enterprises? There are two types of factory feng shui; one is for renting factories, and the other is for self-built factories. In addition to the geographical location and Feng Shui environment of the factory, those who rent a factory must also consider the Feng Shui layout of the entire park and the location of the rented factory in the park. Most of the factories built in industrial parks are now facing the same mountain and in the same direction. Some parks were built without hiring a Feng Shui master to survey them, and the situation ended in decline. The manufacturers that moved in had difficulties in development or went bankrupt, and some eventually rented them out to others as temporary warehouses. Therefore, before renting and moving in, you need to know the layout of the park and factory and the fortune. 1. The geographical location and environment of factory site selection Factors that should be considered when choosing a factory address mainly include the following aspects. 1. The factory site should be located in an urban area; this type of factory is suitable for high-tech industries that are technology- and capital-intensive, have small land areas, and have no noise, air, or water pollution. The advantages are: very convenient transportation, good information, easy introduction of talents, low transportation costs, etc. Disadvantages are: high land and labor costs, many restrictions, and easy relocation due to urban planning and other reasons. 2. Choose a factory site in the suburbs; this type of factory site has the strongest applicability and has various advantages of a downtown site. It is also suitable for labor-intensive enterprises, and the cost of land and labor is also low, and there are relatively few restrictions. It is a kind of factory site. Ideal factory location. 3. Choose a factory site in the countryside; there are many conditions for such a factory site, including being far away from the city, docks, and train stations, as well as roads, water supply, and power supply, which should be analyzed separately. This type of factory is suitable for labor-intensive, polluting industries. The advantages are: low land cost, low labor cost, close to raw material production, low quality requirements for workers, and easy recruitment. There are also many disadvantages: high sales and transportation costs, small amount of information, poor traffic conditions, frequent water and power outages, etc. The advantages and disadvantages of the above analysis are that in terms of geographical location, it does not mean that locations with more disadvantages are not suitable for factory location. This should be determined according to the nature of the factory. For example, there are many advantages in choosing a location in the city center, but if your factory is a labor-intensive enterprise, it is not suitable. It would be more suitable to arrange it outside the city center or in the countryside. Consideration should be given to raw materials, labor supply, marketing, land costs, and the investment environment. Whether the supply of raw materials is guaranteed, freight rates, whether skilled workers or heavy manual workers needed for production can be recruited, whether market sales are favorable, etc. are all factors that should be considered when selecting a factory location. At the same time, whether you can buy or rent suitable land and factory buildings in a place suitable for your factory, and whether the land price and house price are reasonable are all important conditions that must be considered when selecting a location. Another very important prerequisite is the investment environment (including hard environment and soft environment) where the factory is located. The hard environment mainly refers to whether transportation is convenient, whether electricity demand is guaranteed, and whether water supply, water sources, and sewage discharge can meet the requirements. The soft environment mainly refers to whether *** pays attention to it and whether it provides a relaxed environment. For example, whether there are preferential tax treatment, whether administrative charges have been canceled or reduced, whether there are arbitrary charges and apportionments, whether the efficiency of government agencies is high, whether there are bad habits of "eating, taking, getting stuck, and asking for things", and of course local folk customs. Whether they are strong or not, the security situation is good or bad, etc. 2. Feng shui factors for factory location selection There are two fundamental purposes for factory location selection: First, the production can be carried out smoothly, the products are qualified, the output and sales volume are large, and whether it can make money. The second is to prevent accidents such as fires and work-related injuries. To achieve this goal, factory location selection is the primary condition. In addition to achieving the above three factors, Feng Shui factors are also an important aspect. Because a place with good Feng Shui means that the place has a good space and time, which can make decision-makers sharp, managers in good condition, and producers focused. 3. Feng Shui Key Points for Factory Site Selection 1. There should be no roads running straight around the factory site, water rushes, or corners of rough mountains, fist mountains, knife-shaped mountains, or triangular buildings. Do not choose the factory site at a three-fork intersection, an arched roadside, or in the middle of a three-fork road. In an "iron cage" shaped plot surrounded by roads; do not choose it next to overpasses, large substations, or tall power towers. 2. There is no "yin gas", "grievance gas", "evil gas" or "filth gas" around the factory site. Build the factory in a cemetery or hospital.
Cemeteries and hospital sites are closely related to the dead and have too much Yin energy. There is a strong sense of "grievance" in interrogation rooms, prisons, and execution site sites. As the saying goes: "Which yamen doesn't have a few ghosts who have died?" There are "evil spirits" in front of the temple, behind the temple, and in the areas opposite the yamen gate. There is a lot of "foul smell" next to landfills, sewage treatment plants, other smelly ditches, and sewage rivers. They are all unclean places. If you mistakenly build a factory in such a place, some strange or unpredictable things may happen in the future, so you should avoid it. 3. The factory site is located in a place where wind gathers energy and water embraces mountains. The mountains and rivers mentioned here are not necessarily real mountains and rivers. It is better if there are real mountains and rivers. It is appropriate to carry... >>
Regarding Feng Shui issues in factories< /p>
What do you think of Feng Shui in factory construction? Things to pay attention to in terms of Feng Shui in factory construction are:
1. When constructing land for steel structure factory buildings, attention should be paid to the Feng Shui pattern of the general environment, which is of certain significance to the development of the factory.
2. Pay attention to the local climate factors in the construction area, which is beneficial to the storage of goods and equipment in the factory.
3. Pay attention to underground engineering and drainage layout to prevent unfavorable factors such as factory building collapse and water accumulation.
4. Road traffic precautions, pay attention to the location of the entrance and exit of the factory, and some Feng Shui factors.
5. Pay attention to personal safety.
Feng Shui consultation tieba.baidu/p/4062581828
30 points on factory feng shui issues If you want to pay attention to the feng shui of the factory, you should start from the beginning;
1. Determine whether the attributes of factory production conflict with the attributes of sitting direction;
2. Feng shui should be determined according to the attributes of the factory legal person;
3. Based on the current sitting direction Is it the direction of the God of Joy and the use of God?
4. In fact, Feng Shui includes knowledge of environment, geography, humanities, Yili, Five Elements, Shengke and other disciplines;
If the factory If the layout conflicts with Feng Shui, adjustments must be made. As the saying goes, one thing can reduce the other, so as to help righteousness and reduce evil.
When choosing a factory site and layout, you need to pay attention to which Feng Shui is conducive to production and operation.
Practical, convenient, comfortable, safe, hygienic and beautiful are good Feng Shui. Using these standards to measure is both practical and easy to grasp. Consistent with the above views, Feng Shui has a positive interpretation; contrary to the above views, Feng Shui has a negative interpretation. The complete sets of houses in modern communities are conceived, designed and built according to the concepts of practicality, convenience, comfort, safety, hygiene and beauty. They can only be judged according to this concept and concept. Using the ancient "Luo (mule) horse" concept to make comments can only be misleading.
How to choose and purchase a house depends on everyone’s preferences. The most important sign of aspiration is "liking". Everyone has different preferences, and what you like is good Feng Shui. If you don’t like it, you will feel depressed or even uncomfortable wherever you go. No matter how good a place like this is, it is only a good place for others, and it is not the good Feng Shui the person needs.
What is the best Feng Shui? ——The best Feng Shui is a balanced mentality; no greed, no desire, no extravagant hopes, and no unexpected expectations is good Feng Shui.
Is raising children related to Feng Shui? Is there a master who understands housing issues? ——Raising children is definitely related to Feng Shui. The subjective conditions of Feng Shui are the basis of human thought; the objective conditions of Feng Shui are the surrounding environment. The two complement each other and will definitely affect the physical and mental growth of children.
Feng Shui is the correct choice of living terrain. My conclusion from the hundreds of sites is that most of them have the characteristics of Feng Shui and Qi and the use of compasses, and they should obviously have certain compass cultural meanings. However, they are basically vetoed due to the limitations of terrain and conditions, leaving no continuation. population. The examples I have found in reality are that the terrain is illegal, living and production conditions are lacking, and the use of Feng Shui and compass is child's play and meaningless. That's why I came to the conclusion: "Practical, convenient, comfortable, safe, hygienic, and beautiful are good Feng Shui. What is Feng Shui? It is more beneficial to think more from a scientific perspective." In the past, it was impossible to build houses in many areas, but now there are steel bars, cement, glass, running water, electricity, and gas, and houses can be built. High-quality building materials overcome the limitations of poor terrain.
Wood, soil, paper windows, water lifts, thatch, pine fire and steel bars, cement, glass walls, tap water, electricity and gas are absolutely two Feng Shui meanings, and they also represent the progress of the times and the benefits of science to mankind. Bringing an unprecedented new world. In the era of wood, soil, paper windows, water hoisting, thatch, and pine fires, you could only choose low-lying areas with leeward and sunny sides, and the houses could not be high, only short. The basic disadvantages of low-lying and low-rise buildings are that they are dark and humid, have poor ventilation conditions, poor moisture and drying performance and poor air quality, and are prone to mildew and disease. Steel bars, cement, glass walls, tap water, electricity, and gas make it entirely possible to move houses to higher places, making taller buildings possible. They are obviously brighter and have better ventilation and drying performance. For example, in the past, platform-shaped elevated areas were not suitable for building houses due to limitations in building materials. Now, with the advantages of building materials, they are not only suitable for building houses, but also are better than low-lying areas in terms of brightness, air circulation and waterproofing performance. More conducive to human physical and mental health.
The quality of a city’s feng shui is not determined by the natural feng shui of a narrow area, but by the dominant political and geographical feng shui formed on the basis of the overall natural geographical feng shui. , economic geography feng shui and human geography feng shui. Among them, *** is the most typical political feng shui feature. For example: In the 1980s, there used to be a township-level *** on the other side of the river in a certain place. Due to the existence of *** institutions, there are only a dozen commercial outlets on the other side of the river, which are considered the largest locally, forming a small and lively street market. Due to various reasons, the township-level shopping malls were relocated to other places, and a "sudden cold" situation immediately occurred there. In less than three months, more than a dozen of the largest stores could no longer maintain their operations. There are three small shops, each of which is just a stall, without the prosperity of the past. A small township-level government does not have an independent financial functional basis, and its influence can have such a huge Feng Shui effect, not to mention a larger government agency with independent decision-making and financial functions. The Feng Shui effect of its influence can be imagined to be even greater. It can also be inferred from this example: What determines a city's Feng Shui is the political geography Feng Shui, economic geography Feng Shui and human geography Feng Shui formed on the basis of physical geography Feng Shui. The close combination of political geography Feng Shui, economic geography Feng Shui, human geography Feng Shui and physical geography Feng Shui is Feng Shui in the complete sense.
Cities have obviously broken away from human dependence on natural geography and feng shui to a greater extent. Developed transportation, roads in the sky, underground, and on the ground, as dense as spider webs, have reached the point where they are omnipresent, forming... >>