It is also a day to study for customizing and buying furniture.
I studied hard for a week,
Finally figured out the advantages and disadvantages of the plate ~
So,
Walk confidently into a shop.
I didn't expect it to happen in an instant? All kinds of plates are surrounded.
Forced to surrender IQ and Qian Qian Jr.
Plates are like jiaozi.
Duang duang duang chopped dumpling stuffing is equivalent to the core of the plate, and seriously it is the bottom material of the plate.
The dumpling skin rolled out by the rolling pin is equivalent to the skin of the plate, and the serious problem is the veneer of the plate.
Similarly:
Then the question is coming ~
There are pork, cabbage, leeks and eggs in jiaozi. ...
Dumpling skins are white, yellow and green. ...
The common plate fillers in the market, that is, base materials, mainly include plywood, fiberboard, particleboard, large core board, finger joint board and so on.
Commonly used in furniture, are the following three:
Put a big tree,
Pia pia pia is cut into thin plates layer by layer,
Then call it a plate glued together.
Plywood ~
I also have a resounding name:
"Multi-layer solid wood board".
Because I am sandwiched layer by layer, it is also called "splint"
Named after the number of layers of the clip, it is also called "splint".
Or named after the thickness of the plate, also known as "Jiuli Board".
But remember,
This layer is bonded together,
A board whose side looks like a wafer,
That's my plywood!
The wood is planed into shavings with different thicknesses,
The board pressed with porcelain is my particleboard!
In ord to mix at that plate boundary,
I have a belt, too? The resounding name of "Solid Wood":
"Solid wood particle board".
Put wood and other plant fibers,
Chop it into powder, and the pressed board is my fiberboard!
When pressing these fiber powders, use more force and less force.
The density of the extrusion plates is different,
So I'm still screaming? Density board.
We are three brothers:
Only medium density fiberboard (or MDF) is most commonly used in home decoration.
From plywood to particleboard to fiberboard,
In fact, it can be seen as three kinds of fillings that are chopped more and more.
The more broken the stuffing is, the more it means,
The smaller the particles in the cardboard,
The easier it is to absorb water and get wet, the lower the bearing capacity will be.
So cut into plywood,
It has the best moisture resistance and good bearing capacity.
Very suitable for near-water space.
It can be used as a cupboard or cupboard door.
On the fiberboard,
You can't make cabinets,
Because it is not moisture-proof and load-bearing.
But the fine particles make it outstanding in modeling ability.
It is a good choice to make cupboard doors.
Well-deserved peerless beauty ~
Particleboard is between the two,
Each performance is relatively balanced,
It is most commonly used to make cabinets and doors.
But by comparison,
There is no plate with good modeling, load-bearing and moisture-proof ability.
Leather can give a good-looking skin to the substrate, help them reduce formaldehyde emission and enhance the moisture-proof ability of the board ~
The common skins of the board are:
Melamine impregnated tape film veneer (referred to as melamine veneer), PVC film veneer, solid wood veneer and baking varnish veneer.
Let's look at the first one first.
Melamine impregnated adhesive tape film pasting
Triamine noodles for short ~
Oh ~ don't be afraid
……
This is a high-definition line printed on a paper base.
It can imitate the effect of wood grain, concrete and stone grain. ?
It is often used to wrap particleboard and plywood to make melamine board.
It not only further enhance that moisture-proof performance of two kinds of plate filler.
Because of the fire-proof, wear-resistant and waterproof soaking treatment, the surface wear resistance of the two plates is also enhanced.
So it is also called:
Wear-resistant plate, integral plate.
Because there is no need to paint after pasting a layer of veneer, it is also called "paint-free board".
In most cases, customized cabinets are made of melamine board.
When the shape of the door panel is not high, you can also use triamine panel as the door panel ~
PVC film covering?
Its biggest feature is softness,
Therefore, it is most commonly used to wrap with well-shaped fiberboard.
Can help fiberboard to enhance moisture resistance,
And help it make western-style classical shapes.
But the biggest disadvantage of PVC film coverage is that,
It's too expensive to make two sides,
Usually only the front side is wrapped,
The bottom side is mostly white melamine skin.
Solid wood veneer?
Is to put real wood,
A veneer made by slicing.
The biggest advantage is that the effect is real.
A lot of furniture with China classical charm can be used.
Paint?
Different from the previous plates, the baking paint is sprayed on the stuffing.
All six surfaces of the board can be directly sprayed,
Good waterproof and moisture-proof performance, easy to clean,
The effect is a modern and simple feeling.
The biggest drawback is:
The manufacturing process is complicated, the time is long and the price is high.
We often hear about paint boards, that is,
Bake paint to wrap fiberboard and make cardboard.
Mainly used in cabinets, sideboards, etc.
Tip at the end of the article:
Core board:
Its real name is joinery board. It cuts the wood into small strips, puts them together to make the board core, and then sticks the upper and lower boards together with glue, so it is commonly known as the big core board.
The large core board of Malacca core is also called "Malacca board".
Fingerboard:
Cut the tree into small pieces of wood, and then saw the two ends of the small pieces of wood into sawtooth shapes. The pieces of wood are spliced together like fingers, so it is called finger joint board, also called tooth joint board and "solid wood integrated board".
These two kinds of boards are not often used as furniture, so don't bother to remember.
Environmental protection:
From processing to finishing, there are a series of processes that affect the environmental protection of plates.
There is no situation that one board is less formaldehyde than the other, so long as the test report reaches E 1 level ~
The above content is shared by good users, I hope I can help you ~