On the same horizontal line, carefully measure and play the chalk line before construction to determine the horizontal baseline of all carpenters. After setting the horizontal line, make sure that there is no problem in the vertical direction of carpentry. A standard carpenter will carefully measure with a plumb line to control the error in the vertical direction within the allowable range.
Detailed drawings
In carpentry, drawings with detailed dimensions and descriptions are very important. However, it is not enough to have drawings. A standard company will give a detailed explanation to the carpenter at the time of disclosure to ensure the final good effect.
Late construction
Wood products made on site, such as door covers and wooden cabinets, should be coated with a layer of white glue after self-processing, so as to effectively avoid surface arching or cracks. When making TV background wall, wooden keel should be laid first, and gypsum board can be attached to it after checking and confirming it is firm. There must be a gap of 0.5-0.8cm between the two gypsum boards, otherwise it will easily swell and arch in the future.
Veneer structure
The veneering of all kinds of door covers and woodwork is the most testing place for woodworking skills. A good worker can ensure that all the veneers are at a flat 45-degree angle, without gaps and without revealing the color of the bottom plate.
Diversified demand
At present, many owners choose to let the decoration company do their own work in the decoration. The standard practice should be to brush a layer of waterproof paint on the grass-roots board now, and then start doing it 0.5cm from the ground. If you want to change the original guest bathroom into a storage room, you must supervise the workers to seal the sewer pipe and check whether there is any hidden danger of water leakage upstairs. All cabinets in the storage room must be raised to10cm above the ground.
Material selection and control
In addition to accurate measurement, standardized woodworking construction should also be strictly controlled from the stage of material selection. Whether it is a wardrobe or a shoe cabinet, the doors on the surface must be made of the same kind of plate to ensure the consistency of patterns and colors.