How to adjust the fishing drift, mostly semi-Shui Piao, is also a common fishing method. When you start drifting, try to keep the size and weight of the bait, and finally you need to adjust it according to the habits of the fish. This article details how to adjust the fishing drift.
How to adjust the fishing drift 1, the first step of fishing drift adjustment: adjust your eyes.
With large water droplets, gravity is slightly greater than the buoyancy of drifting objects. Then, drive the pole into the nest and constantly adjust the waterline length (the distance to the 8-character circle). If the float can't be seen when it falls into the water, it means that the waterline is short and should be lengthened until it floats out of the water.
Move the drift downward by two drifting distances, that is, shorten the waterline by about 30-50 cm to confirm that the drift is out of the bottom. Then trim the big water drops a little to reduce the weight (you can trim more at first, and when the drift starts to slow down, you should trim the big water drops carefully), so that when the double hook leaves the bottom (half water), the drift will be exposed to the water for 5 (or 4) meshes. The sound so tuned is called "tune 5 or tune 4".
2, fishing drift adjustment Step 2: Adjust the fishing eyes to find the bottom.
Adjust the "fisheye" to find the bottom, and add a heavy object (rubber, lead, bait) that is greater than buoyancy. In general, it is appropriate to add bait with normal size to adjust the drift. At this time, the float should sink into the water because of heavy objects. At this time, the waterline should be lengthened and gradually adjusted until the double hook touches the bottom and the floating eye is exposed 1-5 eyes. This is called "fishing 1-5". If the fishing eye is set to 2, it is called 5 fishing 2 or 4 fishing 2.
3. The first step of fishing and drifting adjustment: actual combat adjustment
For example, every time you go fishing; On the basis of adjusting 5 fishing and 2 fishing, when there is no news of fish or the action is too small to see the drifting action clearly, you can adjust the drifting to 5 fishing 1, that is, change it to fishing "spirit". If you don't catch fish with your mouth and rod, change it to blunt and adjust it to 5 to catch 3. At this time, if you don't catch fish or often walk, continue to adjust the drift to 5 and catch 4, that is, increase the number of drifting eyes above the water surface. If you don't catch any more fish, increase the drift to a maximum of 5, that is, adjust 5 to catch 5. You can adjust 5, grab 6 or 7 under special circumstances.
4. Hook-free bleaching method
Just don't tick it, just adjust it directly. In the absence of hook, the adjusted position is your most punching point; Hang up the hook and bait, and the number of eyes exposed is your best point. Between the dullest point and the sharpest point are all your fishing points.
Step 1: Find the mesh number that is half-filled and hook-free.
Cut off the double hook of the original fishing group, adjust the hook to half water and see its mesh number. This mesh number is the mesh number of the most blunt point to be found below. (suppose it is 1 1 mesh).
Step 2: Find the most blunt point with hook and no bait.
Find the hardest point. Tie the hook to find the bottom until you find the position when there is no hook in the water (1 1 mesh). Don't push hard at this time. This grid is the dullest point, and it is marked with space beans. (it may be that it has been hooked to the end at 9 o'clock. At this time, continue to push up to 1 1 mesh)
Step 3: Hook the bait with a half hose and find the mesh number.
Drift with double bait and half water, look at the mesh number at this time. This mesh number is the mesh number of the most spiritual point to find below. (Suppose it is close to 1 mesh at this time).
Step 4: Take the bait and find the most spiritual point.
Use of float
1, the collocation of float and line group; The big line group floats. Although smart enough, there are many noise signals, which is definitely not desirable. It's much better to have a small string with a big float, but because of the big float and eating more lead bait, it will naturally fall fast (catching bottom fish quickly is a good choice), but when the bait falls fast, it often loses the excellent opportunity to lure fish in a three-dimensional nest and lure fish with bait. Therefore, it is better to match the size and floating number of the line group.
2. The relationship between the float and the hook; Many times, everyone pays great attention to adjustment and fishing. I think it is more important to find out how many visual targets you can press with hooks. It is much easier to adjust fishing when you know that a single hook can float with a few eyes. When the float is abnormal, it can be judged whether the current, bait or fish are making trouble according to the relationship between the hook and the target.
3. Changes in line combination and floating; The fish situation of "wild fishing" changes rapidly, and it is more troublesome to change the drift frequently. It is a good way to simply adjust the length of the sub-line to make up for the shortage of the float. If you want to fish, you can extend the secondary line (fall upward). Small fish can cut short strings and so on.
Drift adjustment skill
1, look up, you can clearly know the state of the bait.
In summer, we use bait to catch carp. We can adjust eight eyes to catch three eyes. When the bait is completely dissolved in the water, the float will automatically leak out of eight eyes, letting us know that there is no bait, and we can replace the bait after lifting the rod in time. And if lead falls to the end, you don't know what the bait is like at the bottom. You can only guess or guess, so people who can't drift will definitely catch less and run more.
2, fishing three eyes, you can know the process of carp feeding.
When the carp has a mouth, you can clearly see the changes of floating and drifting. Generally, carp have two eyes in their mouths, and then float directly in the dark. It can be understood that carp sucks bait into its mouth at the first meal and directly into its mouth at the second meal. At this time, it can also catch fish, but the hook is usually scraped next to the lips; What about the black drift? That's the performance of carp calling for bait and leaving. If you lift the pole at this time, 99% of you can catch fish, but you can't run away. It can be said that it is dead!
How to adjust the drift accurately First, pay attention to the half water depth.
1, drift adjustment is mostly half water. If the water is half water 1 meter deep, the actual water depth is 3 meters when fishing, and the weight of the extra 2-meter fishing line is not reflected on the float, and two eyes may be lost in the 2-meter fishing line. 1 m depth, drift adjustment 4, salvage 2. When fishing at a depth of 3 meters, it may be 2 and 2. The thicker the fishing line, the heavier the weight, and the more meshes are pressed. The farther away from the bottom of the water, the greater the drift error and the duller it is. So be sure to find the bottom before bleaching. When fishing in another fishing spot, it is best to find the bottom first and then readjust the drift after measuring the water depth.
2. When the water depth is 1 m, the weight of bait rises by 2 meshes. When fishing, the water depth is 3 meters, and the bait may have melted, so it can only be crushed 1 mesh. The closer to the bottom of the water, the closer the bait weight is to the actual fishing weight, and the more accurate it floats. Therefore, it is best to find the bottom before drifting to reduce the influence of water depth.
Second, the correct bleaching steps
1, double hook, empty hook, half water, first adjust the drift to about horizontal water, that is, show one or two eyes, horizontal water or slowly sink into the water.
2. Continue to push the float until the number of eyes exposed by the float is higher than that exposed when you were just half full. This is the end. For example, if the water is leveled when it is half full, it will definitely show more than 1 mesh when it is finally found.
3. Find the bottom position of the float in the second step and drop it to 10 to 20cm, then you can start to adjust the float. At this time, it is closest to the bottom without touching the bottom, the waterline is closest to the actual fishing length and fishing weight, and the melting degree of bait is basically similar, so the drift error is the smallest.