Tools: badminton racket, keel hand glue.
1. Start winding from the bottom of the racket, tear off the double-sided adhesive tape at the end, stick it at the angle that the hypotenuse of the sweat absorbent belt is parallel to the plane of the sole, and fix it tightly.
2. After the hypotenuse ends, start winding upwards. Because the base and the wooden handle have different diameters, the first two turns need to be tightened, otherwise there will be wrinkles as shown in the figure, which will affect the appearance and feel.
3. After winding for three times, enter the stage of winding wooden handle. At this stage, please keep the winding force small, because the elasticity of EVA tape is limited, and pulling it too tightly will reduce the expansion space of EVA and then affect the shock absorption effect.
4. Similar to step 2, when winding the handle in the front sleeve stage, please increase the strength, otherwise the sweat-absorbing belt will wrinkle here because of the change of diameter.
5. For the end of the racket, we suggest winding it to the top of the handle preliminaries, and winding half of the last 2CM suction tape can achieve the best aesthetic effect.