Solution of rope bow jumping

The rope bow performance tutorial is as follows:

The first method: tying the waist bow.

1, the short side is placed under the long side.

2. Wind it for a short time, and then tighten the belt.

3. The long one is wound on the short one.

4, this step is the most critical: you have to make a fold, and the folded one will pass through the short circle.

5, tidy up, pull the straps on both sides to the same length, and you're done.

The second way: tie a bow around the neck.

1. First, pass through two belts, one at the top and the other at the bottom.

2. The upper belt bypasses the lower belt, then hangs down from the middle of the two belts to tighten it and tie a slipknot.

3. Fold the lower strap into an S-shape on one side of the bow and place it on the right side along the direction of the strap.

4. Then wrap the bow with the upper belt from top to bottom.

5. After bypassing the right bow, the upper strap is folded into the other bow.

6. Slowly arrange the formed bows.

7. Tighten it a little and fiddle with it a little, and a beautiful flat bow will come out.

The third type: the double bow method.

1. First, tie a knot. Hold down the button and pull up the ribbon on the left with your right hand. Tie another knot, but the second one won't tie well.

2. Overlap the two ribbons and wrap them around the left hand. Then, pass the two ribbons through the middle of the two knots, open the two ribbons and wrap them around a circle slightly smaller than the left hand.

3. Use the left loop to tighten and tidy the shape.