Video tutorial on how to install a children’s twist car. How to install a children’s twist car? The twist car has always been very popular with babies. Riding the twist car is very simple. The baby only needs to sit on the twist car and put his feet up. You can drive by controlling the steering wheel on the pedals. It is also safer and will not cause the baby to fall. After many parents buy a Twister for their babies, they find that they have to install it themselves and don’t know how to install it. The following is a detailed introduction to the video tutorial for installing a children's twist car and how to install a children's twist car.
Installation method of children's twist car:
1. First, take out all the parts of the twist car, place them on a clean open space, and check the parts according to the instructions. Is the quantity correct? After making sure that all the parts are correct, use the installation structure diagram to understand the position of the parts on the twist car.
2. Then you can start the installation. First install the rear wheel bracket on the main body of the body, then install the front wheel, that is, the front foot bracket, and insert it directly into the center hole of the front of the body, and then Just put the rubber sleeve on to the top.
3. Then install the steering wheel and screw on the five-point bushing, and then install the steering wheel cover.
4. Finally, install the battery in the small grid under the steering wheel.
Parents should note that after installing the twist bike, they should check it again to ensure that the screws are not loose, so that it is safe for their children to ride. If you find it troublesome to install the twist car yourself, you can choose to buy a twist car installed by a merchant.
Schematic diagram of twist car installation, hilarious insect twist car installation video
There are many types of twist cars on the market with rich styles. Some brands of twist cars are very cute. For example, the hilarious Bug Twister Car from South Korea has a variety of shapes, such as Rilakkuma, little monkey, stink bug, etc., which is easy for babies to like. Many mothers want to buy a funny bug twister for their babies and want to know how to install it. Below I will give you a detailed introduction to the installation diagram of the twist car and the installation video of the hilarious bug twist car.
How to install the twist car:
1. First pick up the body of the twist car. You can see that there is a hole in the front half of the body. Directly put the front wheel of the twist car Pass through the hole from the bottom of the car body.
2. Put the sponge material sleeve on the front wheel shaft, then align it with the hole on the top of the front of the car body, pass it through, and knock the front wheel tightly. After aligning the steering wheel, insert it directly into the receiving hole of the upper shaft of the front wheel.
3. Then you can fix the steering wheel and front wheel, put the sleeve into the screw in the steering wheel, and tighten the screw clockwise. Try to use expansion screws for the screws, which is safer.
4. Finally, install the rear wheel. Turn the body over, insert the rear wheel bracket directly into the rear wheel hole, then turn the body over to the front, tap the rear wheel gently to ensure that the rear wheel is completely stuck. The body is complete.
The installation method of the hilarious bug twist car is similar. You can find the installation instructions for installation.
Parents should pay attention to the following when installing the twist car:
1. The small wheel in the front wheel is in front, and the big wheel is in the back. This cannot be mistaken.
2. When installing the rear wheel, pay attention to the direction of the rear wheel. The rear wheel should be in a figure-eight shape after being installed correctly. If not, it needs to be reinstalled, otherwise it will affect the driving of the twist car.
If you find it troublesome to install it yourself, you can also buy it already installed by the merchant, or ask the merchant to install it after buying it, which is simple and convenient.
Haowawa Twist Car installation video, how to install the Twist Car steering wheel
Now a one-year-old baby can play by himself without the need for parents to constantly watch. Sometimes the baby can Play with a toy for half a day, among which the baby twister is the most popular toy for some babies now, and it is also quite popular at home. Because the twist car not only has the function of entertainment, it can also help babies strengthen their body, develop their left and right brains, and enhance their flexibility. So, here is the Haowawa Twist car installation video, how to install the Twist car steering wheel?
First of all, after parents buy a good doll and twist the car, the first step is to unbox it, take out the parts inside in order, place them on a clean open space, and check them against the instructions. Quantity of parts. In the second step, after checking that the number of components is sufficient, carefully identify the location of the components according to the installation structure diagram, so that you will have a preliminary understanding of the location of the components. The third step is to install the steering wheel part after installing other components, because the steering wheel part is relatively easy to install. Parents can directly install the steering wheel, then screw on the five-point bushing, and finally install the steering wheel cover, which is basically complete.
Finally, install the battery in the small grid under the steering wheel and your baby can use it. The battery is used to light up the indicator light. Therefore, it is relatively easy to install the baby Niuniu stroller. Basically, you can complete it by following the installation instructions.
Le’s twist car installation video, how to install Le’s twist car, instructions
As an educational toy, the twist car can make children’s reactions more flexible. To cultivate children's ability to solve problems, many parents will buy twist cars for their children.
Many parents buy twist cars for their children online, and each component is separated. Therefore, before babies want to play with the twist cars, parents need to install the twist cars. So, what is the installation video of Le’s Twist Car, how to install and instructions for Le’s Twist Car?
First of all, when parents buy Le's children's twist car, they need to install it themselves, but the installation steps are not very troublesome, and it only takes about ten minutes to install. Secondly, parents can learn from the twist car installation instructions:
Step 1: Align the steering wheel and insert it into the receiving hole of the upper shaft of the front wheel. The steering wheel should be aligned and aligned with the front wheel. .
Step 2: Fix the steering wheel and the front wheel, then use the provided installation tool to insert the sleeve into the screw in the steering wheel, and then slowly tighten it in a clockwise direction.
Step 3: To install the rear wheel of the twist bike, first turn the frame over, and then install the rear wheel of the twist bike.
Step 4: After inserting the rear wheel into the rear wheel hole, turn the frame over to the front so that the rear wheel is on the ground, and then press the rear wheel against the ground to completely snap the rear wheel into the body. , then the installation is complete.