Tools: suture, scissors.
First, draw a cutting picture of the clothes, as shown in the figure.
Second, then draw the cutting map of the hat and sleeve, as shown in the figure.
Third, then put the cloth in the pocket on the table and smooth it, as shown in the figure.
Fourth, then sew the surface of the face cloth and the lining cloth relatively, without sewing the bottom edge, cut off four corners, and be careful not to cut seams. As shown in the figure below.
Fifth, turn it over and press the line on the arc edge of the pocket first. After pressing the thread, cut the middle of the bottom edge of the front garment piece and the middle of the bottom edge of the pocket cloth, as shown below.
6. Then sew the left and right sides and the upper side with the front piece, as shown in the figure below.
7. Then connect the shoulders of the front and rear garment pieces, as shown in the figure below.
Eight, then the sleeves and the body are fixed with bead needles first. The fixed order is to cut from both sides to the middle, the midpoint of the sleeve mountain, and align with the shoulder line. Pay attention to the front and back sleeves, and don't install them backwards, as shown below.
Nine, then put on your sleeves. Close your sleeves and underarms. The sequence is from the cuff to the bottom edge of the clothes, and the armpit is aligned, as shown below.
10. Then connect the lining cloth and tablecloth of the hat respectively. (The hat can be Garib) The edge of this dress hat is wider than the cut-out picture and looks warmer. Add a wide edge between the lining cloth and the tablecloth of the hat and align it, as shown in the figure below.
1 1. Then align the back midpoint of the hat with the middle of the back of the clothes, move forward from this alignment point, and fix the hat and collar with a bead needle, as shown in the following figure.
12. Then sew the cuffs, as shown in the figure below.
13. Then, turn the two layers over and put them into the sleeve and sew them with the sleeve, as shown in the following figure.