2, wormwood as long as the leaf part, wormwood soaked clean.
3. Filter wormwood, cut into pieces, put it into a cooking machine, add 1 10g water, and beat until fine.
4. Filter out the wormwood juice, and now you can weigh out108.6g of wormwood juice.
5. Prepare the alkali solution first: pour the wormwood water into another big bowl, and pour the alkali into the water several times and stir well. (Note: You should wear masks, gloves and goggles for operation. When the alkali is just poured, it smells bad and the temperature can reach 90 degrees. Beware of burns).
6. When the lye is ready, wait for the soap to cool.
7. Weigh the oil for standby, and take a clean deep barrel to adjust the oil. It is best to use a deep bowl with straight sides, which can prevent splashing and is easy to beat well. ) at this time, check the oil temperature. Put a plate of hot water in an oil bowl and heat it to 40 degrees.
8. Note: When the temperature of alkali is reduced to 35℃ for mixing, the temperature difference between oil and alkali is within 5℃. Slowly mix the lye, while pouring the lye and stirring.
9. Stir the eggs for two minutes until the lye is mixed evenly.
10, change to a hand-held cooking stick or an egg beater, if the egg is not beaten until it is thick and does not reach the state of drawing eight characters. When soaping, pat the soap evenly with a scraper until the figure of eight does not disappear.
1 1. After the soap enters the mold, cover it and wrap it with plastic wrap. Put it in a foam box or an incubator for a day or two. When the soap solution becomes solid, it can be demoulded.
12, after demoulding and dicing, it is still very soft and kneaded into balls. I don't care if I use it.
13. It's all caked into balls. Dry in a dry and ventilated place 1 to two months later, cut small pieces of soap and dissolve it in a small amount of water. Use PH test paper to measure the PH value between 7 and 8.
14, brushed wormwood Marseille soap.
15, the foam is fine, and foaming with foam net will be more abundant.